Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SW-101｜Optical Touch Switch SW-100

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SW-101

Part Number

SW-101

Product

Optical Touch Switch

Product Name

 Optical Touch Switch SW-100

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSW-101
Product NumberSW-101
Products NameOptical Touch Switch
The price of the productPlease contact our office
Sensing methodThru-beam type photoelectric sensor (2 beam axes)
Applicable standardsCSA 22.2 No.14, CSA 22.2 No.0.8, ANSI / NFPA 79, UL 508, EN 60947-5-2 (EMC only)
Power voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption100 mA or less (excluding external connection load)
OutputsSemiconductor Photo-MOS relay output × 3
- Maximum load current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.5 V or less (at 100 mA of load current)
Output:Output operationOutput 1: When an object is detected (beam is interrupted): OFF / When an object is not detected (beam is received): ON
Output 2, 3: When an object is detected (beam is interrupted): ON / When an object is not detected (beam is received): OFF
Output:Short-circuit protectionIncorporated
Response time100 ms or less when an object is detected
50 ms or less when an object is not detected
Time-out functionSwitchable either effective or ineffective by short-circuiting terminals (disabled when short-circuited)
External input0 to 1 V or 10 V to +V: Valid (External input indicator lights up)
4 to 6 V or Open: Invalid (External input indicator lights off)
Indicators:Power indicator (POWER)Green LED (lights up when the power is ON)
Indicators:Operation indicator (OPE.)Green LED (lights up when an object is detected)
Indicators:External input indicator 1Green LED (lights up when external input 1 is valid)
Indicators:External input indicator 2Orange LED (lights up when external input 2 is valid)
Indicators:Fault indicator (FAULT)Yellow LED (blinks or lights up when fault occurs)
Environmental resistance:Degree of protectionIP65 (IEC), TYPE 1 (UL 50) (excluding terminal part)
Environmental resistance:Ambient temperature-25 to +50 ℃ -13 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
Environmental resistance:Ambient humidity30 to 85 % RH, Storage: 30 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 Lx or less at the light-receiving face
Environmental resistance:Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance:Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Removable-type terminals:Connector3.5 mm 0.138 in pitch, 2-level socket: 12 pins
Removable-type terminals:Terminal part3.5 mm 0.138 in pitch spring-cage terminals: 6 pins × 2 (FMC1,5 / 6-ST-3,5GS manufactured by Phoenix Contact)
Maximum cable lengthUp to 20 m 65.617 ft (for cable from 0.2 to 0.3 mm2 ), Up to 100 m 328.084 ft (for cable from 0.3 to 1.5 mm2 )
MaterialEnclosure: Polycarbonate, Polyester
O-ring: Silicone rubber
Mounting nut: PBT
Mounting packing: Silicone rubber
WeightNet weight: 130 g approx.
Gross weight: 200 g approx.

MENU

Recently checked products

Recently checked product numbers