Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SG-P2020-S｜Non-Contact Safety Door Switch SG-P

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SG-P2020-S

Part Number

SG-P2020-S

Product

Non-Contact Safety Door Switch

Details

Visible type
(High code / Sub)

Product Name

 Non-Contact Safety Door Switch SG-P

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSG-P2020-S
Product NumberSG-P2020-S
Products NameNon-Contact Safety Door Switch
Product detailsVisible type
(High code / Sub)
Applicable standards:International standardISO 13849-1 : 2015 (Category 4, PLe), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), IEC 60947-5-3, ISO 14119
Applicable standards:JapanJIS B 9705-1, JIS C 0508-1 to 3 (SIL3), JIS B 9961, JIS C 8201-5-2, JIS B 9710
Applicable standards:EuropeEN ISO 13849-1 : 2015 (Category 4, PLe), EN ISO 14119, EN 60947-5-3, EN 300 330, EN IEC 63000, EN 301 489-1
Applicable standards:North AmericaCAN/CSA C22.2 No.14, UL508
Applicable regulations and certificationsCE Marking (Machinery Directive, RE Directive, RoHS Directive), UKCA Marking (Supply of Machinery (Safety) Regulations, RE Regulations, RoHS Regulations), TÜV SÜD certification, TÜV SÜD certification (U.S.A., Canada), the U.S.'s radio regulations (FCC) (Note), Canada's radio regulations (ICES-003, RSS-310) (Note), Singapore's radio regulations (IMDA certification) (Note), Thailand's radio regulations (NBTC certification) (Note), Philippines' radio regulations (NTC certification) (Note), Korea's radio regulations (KC certification) (Note), India's radio regulations (WPC certification) (Note), Indonesia's radio regulations (SDPPI certification) (Note), Malaysia's radio regulations (SIRIM certification) (Note), Vietnam's radio regulations (ICT certification) (Note)
(Note) : This product uses a weak radio signal for its detection operation. Please confirm compliance with applicable laws in the country of use.
Operating distance : Front / SideSao (OFF→ON): 5 mm 0.197 in, Sar (ON → OFF): 15 mm 0.591 in
Power voltage24V DC+10-20％ Ripple P-P 10 % or less
Current consumption20 mA or less
Control outputs (OSSD 1, OSSD 2)—
Control outputs (OSSD 1, OSSD 2):Operation mode—
Control output(OSSD):Protection circuit—
Response time• For single unit: ON→OFF 100 ms or less, OFF→ON 100 ms or less
• For multiple units: Time for single unit + 5 ms x (number of connected units - 1)
Check input and outputDedicated communication line between the switch body (standard) and the switch body (sub) (Note)
* It is not for external input and output. (voltage range 0 V to 5 V DC)
(Note) : When using the device as a single unit, connect the check input with the check output.
Number of units connected in series30 units or less (standard 1 unit, sub 29 units)
Pollution degree3
PFHD1.00 × 10−10
DCavg99%
Environmental resistance:Degree of protectionIP65（IEC）
Environmental resistance:Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +65 ℃ -13 to +149 ℉
Environmental resistance:Ambient humidity30 to 85 % RH, storage: 30 to 95 % RH
Environmental resistance:Voltage withstandability1,000 V AC for one minute between all supply terminals connected together and enclosure
Environmental resistance:Insulation resistance20 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Environmental resistance:Vibration resistance10 to 55Hz, 1 mm double amplitude, 2 hours each in X, Y, and Z directions
Environmental resistance:Shock resistance300 m/s2 (approx. 30 G), 3 times each in X, Y, and Z direction
MaterialSwitch body: PBT, PC, SUS (stainless steel), EPDM
Actuator: PBT, PC
Cable4–core cabtyre cable, 3 m 9.843 ft long
Connected cable length• When using only one unit: Maximum cable length of 20 m 65.617 ft between switch body and power supply unit
• When connecting multiple units in series: Maximum total cable length of 100 m 328.084 ft, maximum cable length of 20 m 65.617 ft between two adjacent units
WeightSwitch body (sub): 120 g approx., Actuator : 20 g approx.
Gross weight210 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were ambient temperature +23 ℃ +73 ℉.

■Transponder specifications
Operating frequency: 125 kHz
Max. transmitter output: 3.33 μW

MENU

Recently checked products

Recently checked product numbers