{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SF4B-F47(V2)｜Safety Light Curtain Type 4 SF4B Ver.2(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    SF4B-F47(V2)

    Part Number

    SF4B-F47(V2)

    Product

    Safety Light Curtain Type 4

    Details

    Min. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)

    Product Name

    		 Safety Light Curtain Type 4 SF4B Ver.2(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberSF4B-F47(V2)
    Product NumberSF4B-F47(V2)
    Products NameSafety Light Curtain Type 4
    Product detailsMin. sensing object ø14 mm ø0.551 in type (10 mm 0.394 in beam pitch)
    The price of the productPlease contact our office
    CE marking directive complianceMachinery Directive, EMC Directive, RoHS Directive
    No. of beam channels47
    Protective height470 mm 18.504 in(Note:In the case of "When used as safety device for presses in China", the distance between the center of the first beam axis and the center of the last beam axis of the device becomes the protective height.
    Protective height : China Press compliant (GB/T 4584)460mm 18.110 in
    Current consumptionEmitter: 100 mA or less
    Receiver: 160 mA or less
    PFHD3.6 × 10-9
    MTTFD100 years or more
    Weight(Total of emitter and receiver)960 g approx.
    Applicable standards:International standardIEC 61496-1/2 (Type 4), ISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
    (Note) PLe SIL3 compliant from production in August 2009.
    Applicable standards:JapanJIS B 9704-1/2 (Type 4), JIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
    (Note) PLe SIL3 compliant from production in August 2009.
    Applicable standards:EuropeEN 61496-1 (Type 4), EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3), EN 55011, EN 50178, EN 61000-6-2
    (Note) PLe SIL3 compliant from production in August 2009.
    Applicable standards:North AmericaANSI/UL 61496-1/2 (Type 4), ANSI/UL 508, UL 1998 (Class 2), CAN/CSA 61496-1/2 (Type 4), CAN/CSA C22.2 No.14, OSHA 1910.212, OSHA 1910.217(C), ANSI B11.1 to B11.19, ANSI/RIA 15.06
    (Note) PLe SIL3 compliant from production in August 2009.
    Applicable standards:South Korea (S-Mark)S1-G-35-2005, S2-W-11-2003
    (Note) PLe SIL3 compliant from production in August 2009.
    Applicable standards:ChinaGB/T 4584
    (Note) PLe SIL3 compliant from production in August 2009.
    Operating range0.3 to 7 m 0.984 to 22.966 ft
    (Note) The operating range is the possible setting distance between the emitter and the receiver.
    Min. sensing objectø14 mm ø0.551 in opaque object
    (Note) When the floating blanking function is used, the size of the min. sensing object is changed.
    Effective aperture angleplus or minus 2.5°or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2)]
    Power voltage24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open-collector transistor (switching method)
    - When selecting PNP output: Max. source current 200 mA, When selecting NPN output: Max. sink current 200 mA
    - Applied voltage: same as supply voltage (When selecting PNP output: between the control output and +V, When selecting NPN output: between the control output and 0 V)
    - Residual voltage: 2.5V or less (When selecting PNP output: source current 200 mA, when selecting NPN output: sink current 200 mA) (when using 20 m 65.617 ft length cable)
    Control outputs (OSSD 1, OSSD 2):Operation modeON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal)
    (Note) The outputs are not ''OFF'' when muting function is active even if the beam channel is interruped.
    (Note) In case the blanking function is valid, the operation mode is changed.
    Control outputs(OSSD1, OSSD2):Protection circuitIncorporated
    Response timeOFF response: 14 ms or less, ON response: 80 to 90 ms
    Auxiliary output (Non-safety output)PNP open-collector transistor / NPN open-collector transistor (switching method)
    - When selecting PNP output: Max. source current 60 mA, When selecting NPN output: Max. sink current 60 mA
    - Applied voltage: same as supply voltage (When selecting PNP output: between the auxiliary output and +V, When selecting NPN output: between the auxiliary output and 0 V)
    - Residual voltage: 2.5V or less (When selecting PNP output: source current 60 mA, when selecting NPN output: sink current 60 mA) (when using 20 m 65.617 ft length cable)
    Auxiliary output (Non-safety output):Operation modeOFF when control outputs are ON, ON when control outputs are OFF (Factory setting; operating mode can be changed using the SFB-HC handy-controller(optional)).
    Auxiliary output (Non-safety output):Protection circuitIncorporated
    Auxiliary output (Non-safety output):Responce timeOFF replay: 34 ms or less, ON replay 110 ms or less
    Interference prevention functionIncorporated
    (Note) Please use 12-core cable.
    Emission halt functionIncorporated
    Interlock functionIncorporated [Manual reset / Auto reset (Note)]
    (Note) The manual reset and auto reset are possible to be switched depending on the wiring status.
    External device monitoring functionIncorporated
    Override functionIncorporated
    (Note) Please use 12-core cable.
    Muting functionIncorporated
    (Note) Please use 12-core cable.
    Optional functionsFixed blanking, floating blanking, auxiliary output switching, interlock setting changing, external relay monitor setting changing, muting setting changing, protecting, light emitting amount control
    (Note) In case of using optional function, the handy-controller (SFB-HC) (optional) is required. However, a handy-controller cannot be used with the SF4B-x-01<V2> and the SF-C14EX-01.
    Environmental resistance:Degree of protectionIP67 / IP65 (IEC)
    Environmental resistance:Ambient temperature-10 to +55 °+14 to +131 ℉ (No dew condensation or icing allowed), Storage: -25 to +70 °-13 to +158 ℉
    Environmental resistance:Ambient humidity30 to 85 % RH, Storage: 30 to 95 % RH
    Ambient illuminanceIncandescent light: 3,500 lx or less at the light-receiving face
    Environmental resistance:Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Environmental resistance:Insulation resistance20 MOhm , or more, with 500 V DC megger between all supply terminals connected together and enclosure
    Environmental resistance:Vibration resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
    Environmental resistance:Shock resistance300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each
    Emitting elementInfrared LED (Peak emission wavelength: 870 nm 0.034 mil)
    MaterialEnclosure: Aluminium
    Upper and lower edges: Iron
    Sensing surface: Polycarbonate / Polyester resin
    Cap: PBT
    Connecting methodConnector
    Cable lengthTotal length up to 50 m 164.042 ft is possible for both emitter and receiver, with optional mating cables
    (Note) The cable can be extended within 30 m 98.425 ft (for emitter / receiver) when two light curtains are connected in series, within 20 m 65.617 ft when three light curtains are connected in series. Furthermore, when the muting lamp is used, the cable can be extended within 40 m 131.234 ft (for emitter / receiver).
    AccessoriesSF4B-TR14 (Test rod): 1 No

    MENU

    Recently checked products

    Recently checked product numbers