Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SU-79｜Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    SU-79

    Part Number

    SU-79

    Details

    Remote sensitivity selection type

    Product Name

    		 Slim Body Automatic Sensitivity Setting Photoelectric Sensor SU-7/SH(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberSU-79
    Product NumberSU-79
    Product detailsRemote sensitivity selection type
    Applicable sensor headSH series
    Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
    Current consumption35 mA or less
    Sensing output<NPN output type>
    NPN open-collector transistor
    ・Maximum sink current: 100 mA
    ・Applied voltage: 30 V DC or less (between sensing output and 0 V)
    ・Residual voltage: 1.0 V or less (at 100 mA sink current)
            0.4 V or less (at 16 mA sink current)
    Sensing output:Output operationSelectable either Light-ON or Dark-ON with the ON and OFF buttons
    Sensing output:Short-circuit protectionIncorporated
    Self-diagnosis output<NPN output type>
    NPN open-collector transistor
    ・Maximum sink current: 50 mA
    ・Applied voltage: 30 V DC or less (between self-diagnosis output and 0 V)
    ・Residual voltage: 1.0 V or less (at 50 mA sink current)
            0.4 V or less (at 16 mA sink current)
    Self-diagnosis output:Output operationON under unstable sensing condition (restored automatically after 40 ms approx.), or if the sensing output is short-circuited (restored when short-circuit is rectified).
    (For the remote sensitivity adjustment type, it turns ON for 40 ms approx. Also after the remote sensitivity input is received.)
    Self-diagnosis output:Short-circuit protection-
    Response time0.6 ms or less (0.8 ms or less when the interference prevention function is used)
    Operation indicatorRed LED (lights up when the sensing output is ON)
    Stability indicatorGreen LED
    ("RUN" mode: Lights up under stable light received condition or stable dark condition
    "SET" mode: At the time of sensitivity setting, blinks twice when the difference between ON and OFF levels is greater than the hysteresis, but blinks 15 times when it is equal to or less than the hysteresis. Also blinks twice after the interference prevention is set
    "SET" mode → When "SIF" or "RUN" mode is selected: Blinks from 0 to 5 times according to the sensitivity margin)
    Test input (emission halt) function-
    External synchronization function-
    Remote sensitivity setting function-
    Remote sensitivity selection functionIncorporated (Stores four sensitivities)
    Sensitivity shift & limit sensitivity setting functionsShifts the set sensitivity level
    Automatic interference prevention functionIncorporated
    Timer functionON-delay / OFF-delay timer (variable 0 to 5 sec.)
    Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
    Storage: -20 to +70 ℃ -4 to +158 ℉
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
    Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
    MaterialEnclosure: Heat-resistant ABS, Case cover: Polycarbonate, Cable lock lever: PPS
    Cable0.15 mm2 6-core cabtyre cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
    WeightNet weight: 65 g approx.
    AccessoryMS-DIN-2 (Amplifier mounting bracket): 1 pc., SU-CT1 (Stripper): 1 pc.
    RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

    MENU

    Recently checked products

    Recently checked product numbers