Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LX-101-Z｜Digital Mark Sensor LX-100

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

LX-101-Z

Part Number

LX-101-Z

Product

Digital Mark Sensor

Details

Plug-in connector type

Product Name

 Digital Mark Sensor LX-100

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberLX-101-Z
Product NumberLX-101-Z
Products NameDigital Mark Sensor
Product detailsPlug-in connector type
The price of the productPlease contact our office
Applicable regulationsEMC Directive, RoHS Directive
Sensing range10 ± 3 mm 0.394 ± 0.118 in
Spot size1 x 5 mm 0.039 x 0.197 in (at 10 mm 0.394 in setting distance)
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumptionNormal mode: 750 mW or less(Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less(Current consumption 25 mA or less at 24 V supply voltage)
Output 1(OUT)NPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less (at 100 mA sink current)
Output 1:Short-circuit protectionIncorporated
Output 1:Output operationMark mode: Light-ON / Dark-ON (Auto-setting on teaching)
Color mode: Consistent-ON / Inconsistent-ON (Setting on teaching)
Output 2(OUT)-
Output 2:Short-circuit protection-
Output 2:Output operation-
Response timeMark mode: 45 micro s or less
Color mode: 150 micro s or less
Teaching inputNPN non-contact input
- Signal condition: High... +5 V to +V, or open, Low... 0 to +2 V (source current: 0.5 mA or less)
- Input impedance: 10 kOhm approx.
Digital display4-digit red LED display
Sensitivity settingMark mode: 2-level teaching / Full-auto teaching
Color mode: 1-level teaching
Fine sensitivity adjustment functionIncorporated
Timer functionIncorporated with variable ON-delay / OFF-delay timer,
switchable either effective or ineffective
(Timer period: 1 to 500 ms, 9 levels variable)
ProtectionIP67 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm double amplitude or maximum acceleration 196 m/s2 in X, Y, and Z direction for 2 hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directionsthree times each
Emitting elementCombined Red / Green / Blue LEDs (Peak emission wavelength: 640 nm 0.025 mil / 525 nm 0.021 mil / 470 nm 0.019 mil)
MaterialEnclosure: PBT
Display cover: Polycarbonate
Operation buttons: Silicone rubber
Lens: Glass
Lens holder: Aluminum
Cable(Note) Mating cable is not supplied with the plug-in connector type. Please order it separately.
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 55 g approx.
Gross weight: 120 g approx.
AccessoryM4 (length 30 mm 1.181 in) screw with washers: 2 pcs.

MENU

Recently checked products

Recently checked product numbers