Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LS-H21｜Digital Laser Sensor LS-400

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

LS-H21

Part Number

LS-H21

Product

Digital Laser Sensor

Details

Sensor head (Diffuse reflective type)

Product Name

 Digital Laser Sensor LS-400

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberLS-H21
Product NumberLS-H21
Products NameDigital Laser Sensor
Product detailsSensor head (Diffuse reflective type)
The price of the productPlease contact our office
Applicable amplifiersLS-401(P), LS-401(P)-C2, LS-403
Sensing range:U-LG mode30 to 1,000 mm 1.181 to 39.370 in
Sensing range:STD mode30 to 500 mm 1.181 to 19.685 in
Sensing range:FAST mode30 to 300 mm 1.181 to 11.811 in
Sensing range:H-SP mode30 to 300 mm 1.181 to 11.811 in
Operation indicatorOrange LED (lights up when the amplifier output is ON)
Laser emission indicatorGreen LED (lights up during laser emission)
Spot-shape adjusterMulti-turn adjuster
ProtectionIP40 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +70 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2 in X, Y, and Z direction for 2 hours each.
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element:IEC / EN / JIS / GB / KS standards conforming typeRed semiconductor laser,
Class 2 (IEC / EN / JIS / GB / KC)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
Emitting element:FDA / IEC / EN / JIS standards conforming typeRed semiconductor laser,
Class 2 (FDA / IEC / EN / JIS)
(Max. output: 3 mW Peak emission wavelength: 655 nm 0.026 mil)
(Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated July 26, 2001, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 56.
MaterialEnclosure: PBT (Mounting part: PEI)
Lens cover: Acrylic
Cable0.1 mm2, single core two parallel shielded cables, 2 m 6.562 ft long
(Connector for amplifier attached)
(Note) Cable cannot be extended.
WeightNet weight: 30 g approx
Gross weight: 50 g approx
AccessoryWarning label 1 set (IEC / EN / JIS / GB / KS)

MENU

Recently checked products

Recently checked product numbers