Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-F1｜Pipe-mountable Liquid Level Detection Sensor EX-F1

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EX-F1

Part Number

EX-F1

Product

Pipe-mountable Liquid Level Detection Sensor

Details

Amplifier built-in, Pipe-mountable

Product Name

 Pipe-mountable Liquid Level Detection Sensor EX-F1

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEX-F1
Product NumberEX-F1
Products NamePipe-mountable Liquid Level Detection Sensor
Product detailsAmplifier built-in, Pipe-mountable
Applicable regulationsEMC Directive, RoHS Directive
Sensing objectLiquid
(Note):Unclear or highly viscous liquid may not be detected stably.
Applicable pipe diameterOuter dia. ø6 to ø13 mm ø0.236 to ø0.512 in transparent resin pipe
[PFA (Fluorine resin) or equivalently transparent pipe, wall thickness 1 mm 0.039 in ]
(Note：Do not use the sensor with pipes other than the above specified.)
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption30 mA or less
(Note：Unclear or highly viscous liquid may not be detected stably.)
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output:Output operationSwitchable either Light-ON (Liquid-absent-ON) or Dark-ON (Liquid-present-ON)
Output:Short-circuit protectionIncorporated
Response time2 ms or less
Operation indicatorRed LED (lights up when the output is ON)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
(Note：Liquid being detected should also be kept within the rated ambient temperature range.)
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminancelncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (modulated)
MaterialEnclosure: Polycarbonate, Tying band: Nylon, Anti-slip tube: Silicone
Cable0.1 mm2 3-core cabtyre cable, 1 m 3.281 ft long
Cable extensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 15 g approx., Gross weight: 60 g approx.
AccessoryTying band: 2 pcs., Anti-slip tube: 2 pcs.

MENU

Recently checked products

Recently checked product numbers