Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EQ-511｜Adjustable Range Reflective Photoelectric Sensor EQ-500

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EQ-511

Part Number

EQ-511

Product

Adjustable Range Reflective Photoelectric Sensor

Details

DC-voltage

Product Name

 Adjustable Range Reflective Photoelectric Sensor EQ-500

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEQ-511
Product NumberEQ-511
Products NameAdjustable Range Reflective Photoelectric Sensor
Product detailsDC-voltage
The price of the productPlease contact our office
Applicable regulations・EMC Directive ： EN 60947-5-2
・RoHS Directive
Adjustable range0.2 to 2.5 m
0.656 to 8.202 ft
(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m 0.328 ft, or more, away.
(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Sensing range(at maximum setting distance)0.1 to 2.5 m
0.328 to 8.202 ft
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Hysteresis10 % or less of operation distance
(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Repeatability(perpendicular to sensing axis)10 mm
Note : The adjustable range, sensing range, hysteresis and repeatability are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object.
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power / Current consumption45 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
PNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Output operationSwitchable either Detection-ON or Detection-OFF
Output:Short-circuit protectionIncorporated
Response time2 ms or less
Operation indicatorOrange LED (lights up when the output is ON)
Stability indicatorGreen LED (lights up under stable operating condition)
Distance adjuster2-turn mechanical adjuster with indicator
Sensing modeSwitchable either BGS or FGS function
Timer function-
Automatic Interference prevention functionIncorporated
(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object.
ProtectionIP67 (IEC)
Ambient temperature–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed),
Storage: –30 to +70 ℃ –22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 Lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 855 nm 0.034 mil, modulated)
Receiving element2-segment photodiode
MaterialEnclosure: ABS
Front cover: Polycarbonate
Display cover: Polycarbonate
Connection methodScrew-on terminal connection
CableSuitable for round cable φ9 to φ11 mm φ0.354 to φ0.433 in
Cable lengthTotal length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cabtyre cable.
WeightNet weight: 85 g approx.
AccessoryAdjusting screwdriver: 1 pc.

MENU

Recently checked products

Recently checked product numbers