{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

FX-CH-P｜Bank Selection Unit FX-CH

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

FX-CH-P

Part Number

FX-CH-P

Product

Bank Selection Unit

Details

PNP input

Product Name

 Bank Selection Unit FX-CH

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberFX-CH-P
Product NumberFX-CH-P
Products NameBank Selection Unit
Product detailsPNP input
The price of the productPlease contact our office
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption25 mA or less (When all indicators light up)
Bank selection inputHigh: 4 V to +V DC (Sink current: 0.5 to 3 mA Input impedance: 10 kOhm approx.)
Low: 0 to 0.6 V DC, or open
Power indicatorGreen LED (Lights up when the power is ON)
Transmission operation indicatorGreen LED (Lights up when loaded, blinks to lights up when saved)
Ambient temperature-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
MaterialEnclosure: Heat-resistant ABS
Connection methodConnector
(Note) The cable for FX-CH(-P) connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3 core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Cable lengthTotal length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 20 g approx.
Gross weight: 25 g approx.
AccessorySL-CP1 (4-pin type snap male connector): 1 pc.

MENU

Recently checked products

Recently checked product numbers