FX-311P|Manually Set Fiber Sensor FX-311
Download
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
Product Number | FX-311P |
---|---|
Part Number | FX-311P |
Product | Manually Set Fiber Sensor |
Details | PNP output |
Product Name | Manually Set Fiber Sensor FX-311 |
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Part Number | FX-311P |
Product Number | FX-311P |
Products Name | Manually Set Fiber Sensor |
Product details | PNP output |
Supply voltage | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
Power consumption | 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage) |
Output | PNP open-collector transistor • Maximum source current: 100 mA(50 mA, if five, or more, amplifiers are connected in cascade) • Applied voltage: 30 V DC or less (between output and +V) • Residual voltage: 1.5 V or less[at 100 mA sink current (50 mA, if five, or more, amplifiers are connected in cascade)] |
Output:Output operation | Selectable either Light-ON or Dark-ON, with selection switch |
Output:Short-circuit protection | Incorporated |
Response time | 250 μs or less (STD / S-D), 2 ms or less (LONG) selectable with selection switch |
Operation indicator | Orange LED (lights up when the output is ON) |
Stability indicator | Green LED (lights up under stable light received condition or stable dark condition) |
Sensitivity adjuster | 12-turn potentiometer with indicator (Pointer part: red backlight) (Note):The red backlight of the pointer part lights up more brightly when the power is turned ON and when the sensitivity is adjusted. |
Timer function | Incorporated with OFF-delay timer, selectable either effective (approx. 10 ms or 40 ms) or ineffective |
Automatic interference prevention function | Incorporated (Up to 4 sets of fiber heads can be mounted close together.) (Note):When the power supply is switched on, the emission timing are automatically set for interference prevention. |
Ambient temperature | -10 to +55 ℃ -14 to +131 ℉ (If 4 to 7 units are connected in cascade: -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉) (No dew condensation or icing allowed) Storage: -20 to +70 ℃ -4 to +158 ℉ |
Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
Ambient illuminance | Incandescent light: 3,000 ℓx at the light-receiving face |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure (Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure (Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only. |
Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.03 in amplitude in X, Y and Z directions for two hours each |
Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each |
Emitting element (modulated) | Red LED |
Emitting element (modulated):Peak emission wavelength | 650 nm 0.026 mil |
Material | Enclosure: Heat-resistant ABS, Case cover: Polycarbonate |
Connection method | Connector (Note):The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below. Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft) Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft) |
Cable length | Total length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. |
Weight | Net weight: 15 g approx., Gross weight: 20 g approx. |