Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

NA1-PK5-PN｜Ultra-slim Body Picking Sensor NA1-PK5/NA1-5

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

NA1-PK5-PN

Part Number

NA1-PK5-PN

Product

Ultra-slim Body Picking Sensor

Details

PNP output [Standard type]

Product Name

 Ultra-slim Body Picking Sensor NA1-PK5/NA1-5

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberNA1-PK5-PN
Product NumberNA1-PK5-PN
Products NameUltra-slim Body Picking Sensor
Product detailsPNP output [Standard type]
The price of the productPlease contact our office
Sensing height100 mm 3.937 in
Sensing range0.1 to 1.2 m 0.328 to 3.937 ft
(0.05 to 0.5 m 0.164 to 1.640 ft when set to SHORT)
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
Beam pitch25 mm 0.984 in
Number of beam channels5 beam channels
Sensing objectø35 mm ø1.378 in or more opaque object
(completely beam interrupted object)
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumptionEmitter: 0.6 W or less
Receiver: 0.9 W or less
(Note) Obtain the current consumption by the following equation.
Current consumption = Power consumption / Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption of the emitter is
0.5 W / 12 V ≈ 0.042 A = 42 mA
OutputPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch
Output:Short-circuit protectionIncorporated
Response time10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less)
Indicators:EmitterPower indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch)
Indicators:ReceiverOperation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch)
Interference prevention functionIncorporated
Pollution degree3 (Industrial environment)
ProtectionIP62 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED
(Peak emission wavelength: 950 nm 0.037 mil, synchronized scanning system)
MaterialEnclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
Cable0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2, or more, cable.
WeightNet weight: Emitter 80 g approx., Receiver 85 g approx.
Gross weight: 270 g approx.

MENU

Recently checked products

Recently checked product numbers