Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

NA1-PK3-PN-J｜Compact Size Picking Sensor NA1-PK3

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

NA1-PK3-PN-J

Part Number

NA1-PK3-PN-J

Product

Compact Size Picking Sensor

Details

PNP output

Product Name

 Compact Size Picking Sensor NA1-PK3

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberNA1-PK3-PN-J
Product NumberNA1-PK3-PN-J
Products NameCompact Size Picking Sensor
Product detailsPNP output
The price of the productPlease contact our office
Sensing height49.2 mm 1.937 in
Sensing range30 to 300 mm 1.181 to 11.811 in
(Note) The sensing range is the possible setting distance between the emitter and the receiver.
Beam pitch24.6 mm 0.969 in
Number of beam channels3 beam channels
Sensing objectø29 mm ø1.142 in or more opaque object
(completely beam interrupted object)
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 30 mA or less
Receiver: 50 mA or less
OutputPNP open-collector transistor
- Maximum source current: 100 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationON or OFF when one or more beam channels are interrupted, selectable by operation mode switch
Output:Short-circuit protectionIncorporated
Response time10 ms or less (when interference prevention function is used: 30 ms or less)
Indicators:EmitterPower indicator: Green LED (lights up when the power is ON)
Job indicator: Orange LED (lights up when the job indicator input is High)
Indicators:ReceiverOperation indicator: Red LED (lights up when the output is ON)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Orange LED (lights up when the job indicator input is High)
Interference prevention functionIncorporated (Up to 3 units can be mounted close together.)
Pollution degree3 (Industrial environment)
ProtectionIP62 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in (5 G max.) double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (synchronized scanning system)
MaterialEnclosure: Heat-resistant ABS
Lens cover: Acrylic
Indicator cover: Acrylic
Cable0.2 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2 , or more, cable.

MENU

Recently checked products

Recently checked product numbers