Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AGM1NSCS1M1｜Motion Controller GM1

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AGM1NSCS1M1

Part Number

AGM1NSCS1M1

Product

Serial Communication Unit

Product Name

 Motion Controller GM1

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAGM1NSCS1M1
Product NumberAGM1NSCS1M1
Products NameSerial Communication Unit

General specifications

ItemSpecifications
Rated voltage24 V DC
Operating voltage range20.4 to 28.8 V DC
Allowable momentary power failure time10 ms
Operating ambient temperature0 to +55℃
Storage ambient temperature-40～+70 ℃
Operating ambient humidity10 to 95 % RH (at +25 ℃, no condensation or icing)
Storage ambient humidity10 to 95 % RH (at +25 ℃, no condensation or icing)
Dielectric strength (Leakage current: 5 mA)500 V AC for one minute *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance.
Insulation resistance (Test voltage: 500 V DC)100 MΩ or more *Please refer to the unit's specification sheet for details of breakdown voltage and insulation resistance.
Vibration resistanceCompliant with JIS B 3502, IEC 61131-2
5 to 8.4 Hz, half amplitude 3.5 mm,
8.4 to 150 Hz acceleration 9.8 m/s2
10 sweeps each in X, Y and Z directions (1 octave/min)
Shock resistanceCompliant with JIS B 3502, IEC 61131-2
147 m/s2, 3 times each in the X, Y, Z directions
Noise resistance1000 V [p-p] with pulse widths of 1 μs and 50 ns (using a noise simulator) (Power supply terminal)
AtmosphereFree of corrosive gases No excessive dust
European EU StandardsEMC: EN 61131-2
RoHS: EN IEC 63000
Overvoltage categoryCategory II
Pollution degree2
Weight (main unit)Approx. 150 g (including the terminal block)
Consumption current130 mA or less

Communication Specifications

ItemSpecifications
InterfaceConnector 1: RS-232C
Connector 2: RS-422A/485
Communication methodRS-232C: Full-duplex / half-duplex
RS-422A: Full-duplex / half-duplex
RS-485: Half-duplex
Transmission distanceRS-232C: Max. 15 m
RS-422A: Max. 1,200 m(Note 1)(total extension distance)
RS-485: Max. 1,200 m(Note 1)(total extension distance)
(Note 1) Check the transmission distance using the actual unit as it may depend on the destination device. The recommended transmission distance is 100 m or less.
Transmission mode : Number of destination unitsRS-232C: 1:1
RS-422A: 1:1
RS-485: 1:N (N = 32 max.)
ProtocolGeneral-purpose communication / Modbus-RTU (master / slave)
Baud rateGeneral-purpose communication: 1,200 / 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 / 230,400 bps
Modbus-RTU: 1,200 / 2,400 / 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
Maximum data lengthGeneral-purpose: 1,024 Byte
Modbus-RTU: 252 Byte
Communication formatData length: 7 bit / 8 bit
Parity: None, odd, even
Stop code: 1 bit / 2 bit
Start code: None
End code: None

MENU

Recently checked products

Recently checked product numbers