AFPRP2Y04R|FP7 PHLS(遠程I/O)模組
下載
停止接單
停產時期 (JST)
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
詳細規格
項目 | 內容 |
---|---|
品名 | AFPRP2Y04R |
型號 | AFPRP2Y04R |
產品名 | FP7 PHLS (Remote I/O) unit |
顯示價格 | Please contact our office |
COMMUNICATION SPECIFICATIONS (Common)
項目 | 內容 |
---|---|
Communication method | Two-wire system half duplex |
Insulation method | Pulse transformer insulation |
Communication speed | 6 Mbps / 12 Mbps |
Synchronous method | Bit synchronization |
Error check | CRC-12 |
Communication distance | Total length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps) (Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units. |
Connection method | Multi-drop method |
Impedance | 100 Ohm |
Terminator | Mounted on unit |
External interface | Connector-type terminal block |
INPUT SIDE SPECIFICATIONS
項目 | 內容 |
---|---|
Insulation method | Non-isolated |
Rated input voltage | 24 V DC |
Rated input current | 4.3 mA approx. |
Input impedance | 5.6 kOhm approx. |
Min. ON voltage / Min. ON current | 17 V / 2 mA |
Max. OFF voltage / Max. OFF current | 5 V / 0.5 mA |
Response time:OFF→ON | 1 ms or less |
Response time:ON→OFF | 1 ms or less |
OUTPUT SIDE SPECIFICATIONS (Relay)
項目 | 內容 |
---|---|
Insulation method | Relay insulation |
Rated control capacity | 1 A 250 V AC (2 A/common) 1 A 30 V DC (2 A/common) |
Min. load | 0.1 mA 100 mV (resistive load) |
Response time:OFF→ON | 10 ms or less |
Response time:ON→OFF | 5 ms or less |
Life time:Mechanical life | 2 x 10 7 operations or more |
Life time:Electrical life | 1 x 10 5 operations or more (switching frequency: 20 times/minute) |
Surge absorber | None |
Short circuit protection | None |
COMMON GENERAL SPECIFICATIONS
項目 | 內容 |
---|---|
Ambient temperature | 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉ |
Ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation) |
Vibration resistance | 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions |
Shock resistance | 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2) |
Noise immunity | 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator) |
Operating condition | Free from corrosive gasses and excessive dust |
INDIVIDUAL GENERAL SPECIFICATIONS
項目 | 內容 |
---|---|
Rated voltage range | 20.4 to 28.8 V DC |
Current consumption | 85 mA or less |
Net weight | 75 g approx. |