Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

AFPRP2X08D2E｜FP7 PHLS(遠程I/O)模組

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

AFPRP2X08D2E

型號

AFPRP2X08D2E

產品

FP7 PHLS (Remote I/O) unit

詳細

PHLS Slave units

商品名稱

 FP7 PHLS(遠程I/O)模組

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名AFPRP2X08D2E
型號AFPRP2X08D2E
產品名FP7 PHLS (Remote I/O) unit
顯示價格Please contact our office

COMMUNICATION SPECIFICATIONS (Common)

項目內容
Communication methodTwo-wire system half duplex
Insulation methodPulse transformer insulation
Communication speed6 Mbps / 12 Mbps
Synchronous methodBit synchronization
Error checkCRC-12
Communication distanceTotal length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps)
(Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection methodMulti-drop method
Impedance100 Ohm
TerminatorMounted on unit
External interfaceConnector-type terminal block

INPUT SIDE SPECIFICATIONS

項目內容
Insulation methodNon-isolated
Rated input voltage24 V DC
Rated input current4.3 mA approx.
Input impedance5.6 kOhm approx.
Min. ON voltage / Min. ON current17 V / 2 mA
Max. OFF voltage / Max. OFF current5 V / 0.5 mA
Response time:OFF→ON1 ms or less
Response time:ON→OFF1 ms or less

OUTPUT SIDE SPECIFICATIONS (Except relay)

項目內容
Insulation methodNon-isolated
Output typeSink type (Open collector output)
Rated load voltage20.4 to 28.8 V DC
Max. control capacity0.1 A/point
Max. surge current0.5 A
OFF state leakage current0.1 mA or less
ON state maximum voltage drop0.5 V or less
Response time:OFF→ON0.05 ms or less
Response time:ON→OFF0.5 ms or less
Surge absorberZener diode
Short circuit protectionNone

COMMON GENERAL SPECIFICATIONS

項目內容
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目內容
Rated voltage range20.4 to 28.8 V DC
Current consumption100 mA or less
Net weight75 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號