AFP7RTD8｜FP7 溫度輸入模組

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

聯繫我們

截至{date} (JST)

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

項目	內容
品名	AFP7RTD8
型號	AFP7RTD8
產品名	FP7 Temperature input units
顯示價格	Please contact our office
Number of channels	8 channels
Input range(resolution): Resistance temperature detector (resolution: 0.1 ºC)	Pt100 (1): -100.0 to 200.0degrees Pt100 (2): -200.0 to 650.0degrees JPt100 (1): -100.0 to 200.0degrees JPt100 (2): -200.0 to 650.0degrees Pt1000: -100.0 to 100.0degrees
Conversion speed	25 ms/channel + 25 ms Add the drift compensation measuring time to the number of measuring channels.
Overall accuracy	plus or minus 0.1%F.S.or less(at +25degrees +77degrees Fahrenheit ) plus or minus 0.3%F.S.or less(at 0 to +55degrees +32 to +131degrees Fahrenheit )
Allowable signal source resistance	R.T.D. input: 30 Ohm (three wires balanced)
Insulation method:Between input terminals and internal circuit	Photocoupler and isolated DC/DC converter
Insulation method:Between channels	PhotoMOS relay
Conversion execution / non-execution channel setting	Selectable per channel unit
Input range change method	Selectable per channel
Digital processing:Averaging	Cycle, time, moving
Digital processing:Offset setting	Any value within plus or minus 3,000
Digital processing:Gain setting	plus or minus 10%
Comparison of upper and lower limit values	Selectable for one channel
Max. and min. value holding	Selectable for one channel
Broken wire detection	Available
Connection method	Connector type terminal block

項目	內容
Ambient temperature	0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity	10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance	5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s², 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance	147 m/s² or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity	1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating condition	Free from corrosive gasses and excessive dust

MENU