Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

AFP7MXY32DWD｜多功能輸入輸出模組

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

AFP7MXY32DWD

型號

AFP7MXY32DWD

產品

FP7 Multi Input/Output Units

商品名稱

 多功能輸入輸出模組

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名AFP7MXY32DWD
型號AFP7MXY32DWD
產品名FP7 Multi Input/Output Units

Function specifications

項目內容
Basic input and output : Number of occupied I/O pointsInput/Output: 64 points each (4 words)
Basic input and output : Number of external I/O pointsInput: 16 points, Output: 16 points
Basic input and output : Input time constant settingNone, 0.5 μs, 1 μs, 2 μs, 4 μs, 8 μs, 16 μs, 32 μs, 64 μs, 96 μs, 128 μs, 256 μs, 2 ms, 4 ms, 8 ms
Setting possible in 2-point units
Basic input and output : Output polarity settingNo output, N channel, P channel, Both channels (push pull output), Differential output
Setting possible in 4-point units
Interrupt : Number of points8 points/unit
(Max. of 8 units can be used with FP7 system.)
Interrupt : ModeNon-interrupt unit, Interrupt unit
(Set using DIP switches)
Interrupt : Interrupt condition settingTerminal input, Comparison match
Counter : Counter typeRing counter
Linear counter
Counter : Input modeDirection distinction, Individual input, Phase input
Counter : Number of channels4 channels
(Note) : When using elapsed value hold function, number of channels will be limited.
Counter : Counting rangeSigned 32 bit (-2,147,483,648 to +2,174,483,647)
Setting possible of upper and lower limits
Counter : Max. counting speed5 V input voltage: 500 kHz
12 V input voltage: 500 kHz (350 kHz with phase input)
24 V input voltage: 250 kHz (180 kHz with phase input)
(Note) With 50 % duty input pulse.
Counter : Min. input pulse width0.5 μs
Counter : Comparison output settingMax. 8 points
Terminal input counter: 4 channels
Counter : OthersTransfer multiplication function (x 1, x 2, x 4)
Elapsed value offset / preset function
Elapsed value hold function, setting of upper / lower count limits
Input pulse frequency measurement
Overflow / underflow detection
Pulse output : Number of channels4 channels
Pulse output : Output modeDirection distinction, Individual output, Phase output, Comparison match stop
Pulse output : Output terminals : Pulse output function2 terminals / channel (B11 to B18 terminals)
Pulse output : Output terminals : PWM output function1 terminal / channel (B11, B13, B15 and B17 terminals)
Pulse output : Output frequency : Pulse output function1 to 500 kHz (Settable by 1 Hz)
(Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Output frequency : PWM output function1 to 100 kHz (Settable by 1 Hz)
(Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Duty ratio : Pulse output function50 % approx. (Fixed)
Pulse output : Duty ratio : PWM output function0 to 100 % (Settable by 0.1%)
Pulse output : Other functionsPulse number measurement function (dedicated pulse counter 4 channels)

COMMON GENERAL SPECIFICATIONS

項目內容
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目內容
Rated voltage range-
Current consumption100 mA or less
Net weight100 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號