Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

AFP7HSC2T｜FP7 高速計數器模組

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

AFP7HSC2T

型號

AFP7HSC2T

產品

FP7 High-speed Counter Units

商品名稱

 FP7 高速計數器模組

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名AFP7HSC2T
型號AFP7HSC2T
產品名FP7 High-speed Counter Units
顯示價格Please contact our office
Input:Insulation methodPhotocoupler insulation
Input:Rated input voltage12 to 24 V DC / 3.5 to 5 V DC
Input:Input impedance:24 V DC3.0 kOhm approx.
Input:Input impedance:5 V DC390 Ohm (5 V DC) approx.
Input:Usage voltage range:24 V DC10.8 to 26.4 V DC
Input:Usage voltage range:5 V DC3.5 to 5.25 V DC
Input:Min. ON voltage / Min. ON current:24 V DC10 V DC / 4 mA
Input:Min. ON voltage / Min. ON current:5 V DC3.0 V DC / 4 mA
Input:Min. OFF voltage / Min. OFF current:24 V DC2.0 V DC / 2 mA
Input:Min. OFF voltage / Min. OFF current:5 V DC1.0 V DC / 0.5 mA
Input:Input time constant settingNone, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s
Count function:No. of counters2ch
Count function:Counter typeLinear counter / Ring counter
Count function:Counting rangeSigned 32-bit (-2,147,483,648 to +2,147,483,647)
Count function:Max. input frequency4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %)
Count function:Input signalPhases A, B and Z
Count function:External I/OControl signal input: 4 points (2 points/ch), External output: 4 points (2 points/ch)
Count function:Counter input typeIndividual input (Phases A and B): 1 multiple, 2-multiple
Direction discrimination input: 1 multiple, 2-multiple
2-phase input: 1 multiple, 2-multiple, 4-multiple
Measurement function:Frequency measurement functionMeasures the intervals between the variations of count values, and calculates the frequency.
Comparison function:Target value match functionDepending on the count direction, sets or resets the output when the counter value reaches the target value.
External output:Comparison result output functionOutputs the result of comparison function.
Other functions:Capture functionAcquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured.
Other functions:Interrupt input functionAvailable (2 points/ch, Max. 8 points/unit)
(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.
(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number.

COMMON GENERAL SPECIFICATIONS

項目內容
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

項目內容
Rated voltage range-
Current consumption65 mA or less
Net weight130 g approx.

MENU

最近搜尋過的產品

最近搜尋過的產品型號