AFP7CCM2|擴展插件(通信插件)
停止接單
停產時期 (JST)
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
詳細規格
項目 | 內容 |
---|---|
品名 | AFP7CCM2 |
型號 | AFP7CCM2 |
產品名 | FP7 Add-on Cassettes |
顯示價格 | Please contact our office |
SPECIFICATIONS
項目 | 內容 |
---|---|
Interface | RS-422 / RS-485 2 channels |
Transmission distance | Max. 1,200 m 3,937 ft at RS-485 mode, Max. 400 m 1,312 ft at RS-422 mode (Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec. |
Transmission speed | 300,600,1200,2400,4800,9600,19200,38400,57600,115200, 230400 bits/sec. |
Communication method | Half-duplex system |
Synchronous method | Start-stop synchronization system |
Transmission format | Stop bit: 1 bit / 2 bits Parity: Invalid / Valid (Odd / Even) Data length: 7 bits / 8 bits Start code: with STX / without STX End code: CR / CR + LF / None / ETX |
Data transmission order | Transmit from bit 0 in character units. |
Number of connected units | For general-purpose communication: Max. 99 units For computer link: Max. 99 units For PLC link: Max. 16 units For MODBUS-RTU: Max. 99 units (Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec. (Note) The converter SI-35 manufactured by LINE EYE Co., Ltd. is recommendable for the RS-485 at the computer side. When you use the SI-35, please adjust time after FP7 series PLC receives a command until it returns a response by a program. (Note) 1: 1 for RS-422 interface. |
COMMON GENERAL SPECIFICATIONS
項目 | 內容 |
---|---|
Ambient temperature | 0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉ |
Ambient humidity | 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation) |
Vibration resistance | 5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions |
Shock resistance | 147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2) |
Noise immunity | 1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator) |
Operating condition | Free from corrosive gasses and excessive dust |
INDIVIDUAL GENERAL SPECIFICATIONS
項目 | 內容 |
---|---|
Rated voltage range | - |
Current consumption | 90 mA or less (Note) Increased CPU unit current consumption |
Net weight | 25 g approx. (with terminal block) |