Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

MBMU9A2AZ｜MINAS-BL GV Series (Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Part Number

    MBMU9A2AZ

    Product

    Brushless Motors

    Product Name

    		 MINAS-BL GV Series (Discontinued)

    Features

    Speed control type, 50 W ・90 W・130 W, Input power supply for Amplifier: Voltage AC 100 V/200 V, Rated speed 3000 r/min
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberMBMU9A2AZ
    SeriesMBMU
    Rated output90 W
    Voltage specifications200 V
    Flange sq. dimension90 mm sq.
    ShaftPinion shaft
    Oil sealwithout
    Rated rotational speed (r/min)3000
    –About rated rotational speedMotor shaft speed: to be multiplied by the reduction ratio when the gear head is used.
    Speed control range (r/min)30 to 4000
    * Adjustment of the parameters is necessary depending on the workload conditions.
    Rated torque (N ⋅ m)0.29
    Starting torque (Representative value) (N ⋅ m)0.43
    Moment of inertia of rotor ( x10-4 kg ⋅ m²)0.27
    Motor insulation class130(B) (UL certified 105 (A))
    Protection class IP65
    –About EnclosureExcluding the shaft pass-through section and cable end connector.
    These motors conform to the test conditions specified in EN standards (EN60529, EN60034-5).
    Do not use these motors in application where water proof performance is required such as continuous wash-down operation.
    Mass (kg)1.0

    Remarks

    ItemSpecifications
    Applicable AmplifierPlease refer to catalog.
    Applicable Gear HeadPlease refer to the page of the brushless motor catalog GV Series.
    For the reduction ratio, please check the gear characteristics list.

    Applicable Driver

    Part NumberControl methodSupply voltageCommunication functionRegenerating brakePower cable included

    Ⅾiscontinued

    MBEG9A5BCV    		 Speed control Single/3-phase AC200 V to 240 V RS485 Externally connected without

    Ⅾiscontinued

    MBEG9A5BCVC    		 Speed control Single/3-phase AC200 V to 240 V RS485 Externally connected with

    Ⅾiscontinued

    MBEU9A5AAV    		 Speed control Single/3-phase AC200 V to 240 V Without No connection function without

    MENU

    Recently checked products

    Recently checked product numbers