ER-F12A|Fan Type Ionizer ER-F
Download

*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
Product Number | ER-F12A |
---|---|
Part Number | ER-F12A |
Product | Fan Type Ionizer |
Details | Standard fan type |
Product Name | Fan Type Ionizer ER-F |
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Part Number | ER-F12A |
Product Number | ER-F12A |
Products Name | Fan Type Ionizer |
Product details | Standard fan type |
Applicable regulations | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
Charge removal time | 1 sec. approx.(±1,000 V → ±100 V) (Note): Typical value at 200 mm 7.874in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
Ion balance | ±10 V or less (Note): Typical value at 300 mm 11.811in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
Supply voltage | 24 V DC ±10% |
Current consumption | 700 mA or less |
Discharge method | High-frequency AC method |
Discharge output voltage | ± 2 kV approx. |
Main functions | Error output, Discharge halt input |
Indicators | Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) |
Ozone generation | 0.04 ppm or less (Note): Typical value at 200 mm 7.874in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. |
Ambient temperature | 0℃ to +50℃ +32℉ to +122℉ (No dew condensation allowed), Storage : -10℃ to +65℃ +14℉ to +149℉ |
Ambient humidity | 35% RH to 65% RH (No dew condensation allowed), Storage : 35% RH to 65% RH |
Grounding method | C (capacitor) grounding |
Material | Enclosure : ABS, Louver : ABS, Discharge needle unit : PBT, Discharge needle : Tungsten, Bracket : SPHC |
Weight | New weight : 790 g approx. |
Accessories | Straight louver : 1 pc. (Note), Angle louver : 1 pc., Caution label : 1 set, Rubber cushion : 1 pc. (Note): The discharge needle unit is loaded on the straight louver before shipment. |
Remark | If not specified, the ambient temperature for measurement is +20℃ +68℉. |