Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

GX-H8BI-C5｜Rectangular-shaped Inductive Proximity Sensor GX-F/H

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

GX-H8BI-C5

Part Number

GX-H8BI-C5

Product

Rectangular-shaped Inductive Proximity Sensor

Details

NPN output

Product Name

 Rectangular-shaped Inductive Proximity Sensor GX-F/H

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberGX-H8BI-C5
Product NumberGX-H8BI-C5
Products NameRectangular-shaped Inductive Proximity Sensor
Product detailsNPN output
The price of the productPlease contact our office
Max. operation distance2.5 mm 0.098 in plus or minus 8 %
(Note) The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
Stable sensing range0 to 2.1 mm 0 to 0.083 in
(Note) The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Standard sensing objectIron sheet 15 × 15 × t 1 mm 0.591 × 0.591 × t 0.039 in
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Hysteresis20 % or less of operation distance(with standard sensing object)
RepeatabilityAlong sensing axis, perpendicular to sensing axis: 0.04 mm 0.002 in or less
Supply voltage12 to 24 V DC +10/-15 % Ripple P-P 10 % or less
Current consumption15 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current)
Output:Output operationNormally closed
Output:Utilization categoryDC-12 or DC-13
Max. response frequency500 Hz
Operation indicatorOrange LED(lights up when the output is ON)
ProtectionIP68 (IEC), IP68g (JEM)
(Note) Panasonic Electric Works SUNX's IP68 test method
1. Immerse at 0 m below 0 ℃ +32 ℉ water surface and leave for 30 min. Then, immerse at 0 m below +70 ℃ +158 ℉ water surface and leave for 30 min.
2. Regard the heat shock test in 1 as one cycle and perform 20 cycles.
3. Leave in water at a depth of 1 m 3.281 ft in water for 500 hours.
4. After tests 1 to 3, insulation resistance, voltage withstandability, current consumption, and sensing ranges must meet the standard values.
(Note) If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil.
Ambient temperature-25 to +70 ℃ -13 to +158 ℉ , Storage: - 40 to +85 ℃ - 40 to +185 ※
Ambient humidity45 to 85 % RH, Storage: 35 to 95 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance50 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (Max. 20 G) in X, Y and Z directions for two hours each
Shock resistance10,000 m/s2 acceleration (1,000 G approx.) in X, Y and Z directions three times each
Sensing range variation:Temperature characteristicsOver ambient temperature range -25 to +70 ℃ -13 to +158 ℉: Within plus or minus 8 % of sensing range at +23 ℃ +73 ℉
Sensing range variation:Voltage characteristicsWithin plus or minus 2 % for +10/-15 % fluctuation of the supply voltage
MaterialEnclosure: PBT
Indicator part: Polycarbonate / Polyester
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
Net weight20 g approx.

MENU

Recently checked products

Recently checked product numbers