Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

GA-311｜Compact Inductive Proximity Sensor GA-311/GH

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

GA-311

Part Number

GA-311

Product

Compact Inductive Proximity Sensor

Details

Amplifier

Product Name

 Compact Inductive Proximity Sensor GA-311/GH

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberGA-311
Product NumberGA-311
Products NameCompact Inductive Proximity Sensor
Product detailsAmplifier
The price of the productPlease contact our office
Applicable sensor headGH-□SE
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption25 mA or less
OutputNPN open-collector transistor
・Maximum sink current: 100 mA (50 mA, if five, or more, amplifiers are connected in cascade.)
・Applied voltage: 30 V DC or less (between sensing output and 0 V)
・Residual voltage: 1 V or less [at 100 mA (at 50 mA, if five, or more, amplifiers are connected in cascade) sink current.]
Output:Output operationSwitchable either Normally open or Normally closed
Output:Short-circuit protectionIncorporated
Max. response frequency3.3 kHz
Operation indicatorOrange LED (lights up when the output is ON)
Disconnection alarm indicatorRed LED (lights up when the sensor head cable is disconnected or misconnected)
Sensitivity adjuster18-turn potentiometer
Ambient temperature-10 to +60 ℃ +14 to +140 ℉ (If 4 to 7 units are connected in cascade : -10 to +50 ℃ +14 to +122 ℉, if 8 to 16 units are connected in cascade: -10 to +45 ℃ +14 to +113 ℉)
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm double amplitude or maximum acceleration 49 m/s2 in X, Y, and Z direction for 2 hours each
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristicsWithin ±5 %
MaterialEnclosure: Heat-resistant ABS,
Cover: Polycarbonate
Connecting methodConnector
(Note：The cable for amplifier connection is not supplied as an accessory. Make sure to use the optional quick-connection cable given below.
Main cable (3-core): CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
Sub cable (1-core): CN-71-C1 (cable length 1 m 3.281 ft), CN-71-C2 (cable length 2 m 6.562 ft), CN-71-C5 (cable length 5 m 16.404 ft))
Cable lengthTotal length up to 100 m 328.084 ft (if 5 to 8 units are connected in cascade: 50 m 164.042 ft,
if 9 to 16 units are connected in cascade: 20 m 65.617 ft) is possible with 0.3 mm2, or more, cable.
WeightNet weight: 15 g approx.,
Gross weight: 40 g approx.

MENU

Recently checked products

Recently checked product numbers