{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

GX-304S-A-P-R5｜Cylindrical Inductive Proximity Sensor [Amplifier Built-in] GX-300

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

GX-304S-A-P-R5

Part Number

GX-304S-A-P-R5

Product

Cylindrical Inductive Proximity Sensor [Amplifier Built-in]

Details

Small-diameter, shielded type

Product Name

 Cylindrical Inductive Proximity Sensor [Amplifier Built-in] GX-300

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberGX-304S-A-P-R5
Product NumberGX-304S-A-P-R5
Products NameCylindrical Inductive Proximity Sensor [Amplifier Built-in]
Product detailsSmall-diameter, shielded type
SizeΦ4.0 mm Φ0.157 in
ShapeNon-threaded type
Shielded / Non-shieldedShielded
Sensing rangeStandard sensing range
Operating modeNormally open
Connecting methodBending-resistant 5 m 16.404 ft cable
IO-LinkNot support
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Max. operation distance1.2 mm 0.047 in ±10%
(Note): The maximum operation distance stands for the maximum distance for which the sensor can detect the standard sensing object.
Stable sensing range0 to 0.84 mm 0 to 0.033 in
(Note): The stable sensing range stands for the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation.
Standard sensing objectIron sheet 4 × 4 × t 1 mm 0.157 × 0.157 × t 0.039 in
Hysteresis15 % or less of operation distance (with standard sensing object)
Supply voltage10 to 30 V DC [including 10 % ripple (p-p)]
(Note): When used at a power of 12 V, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained.
Current consumption10 mA or less
OutputPNP open-collector transistor
• Maximum source current: 100 mA or less
• Applied voltage: 30 V DC or less (between output to +V)
• Residual voltage: 2 V or less *When the cable length is 2 m 6.562 ft. (at max. source current)
(Note): When the output is 20 mA or less, the product is less susceptible to the effects of internal self-heat generation and therefore a more stable repeat accuracy can be obtained.
Output:Short-circuit protectionIncorporated
response frequency4 kHz
(Note): The response frequency is an average value.
Operation indicatorOrange LED (lights up when the output is ON)
Environmental resistance:Pollution degree3
Altitude2,000 m 6561.68 ft or less
ProtectionIP67 (IEC)
Ambient temperature-25 to +70 °C -13 to +158 °F, Storage: -25 to +70 °C -13 to +158 °F (No condensation or icing allowed)
Ambient humidity35 to 95 % RH, Storage: 35 to 95 % RH (No condensation allowed)
Voltage withstandability500 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance50 MΩ or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration in X, Y and Z directions ten times each
Sensing range variation:Temperature characteristicsWithin ±15 % of sensing range at +23 °C +73 °F in ambient temperature range
Sensing range variation:Voltage characteristicsWithin ±2.5 % for ±15 % fluctuation of the rated supply voltage
MaterialEnclosure: Stainless steel (SUS303), Sensing part: Heat-resistant ABS, Cable: Polyvinyl chloride (PVC)
Cable0.15 mm2 3-core bending-resistant ø2.9 mm ø0.114 in cabtyre cable, 2 m 6.562 ft long
Net weightNet weight: 25 g approx.
Gross weight: 50 g approx.
(Note): When the cable length is 2 m 6.562 ft.

MENU

Recently checked products

Recently checked product numbers