Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

PX-22｜Long Range & Wide Area Photoelectric Sensor PX-2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

PX-22

Part Number

PX-22

Product

Long Range & Wide Area Photoelectric Sensor

Details

Main sensors(Standard model)

Product Name

 Long Range & Wide Area Photoelectric Sensor PX-2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberPX-22
Product NumberPX-22
Products NameLong Range & Wide Area Photoelectric Sensor
Product detailsMain sensors(Standard model)
Applicable regulationsEMC Directive, RoHS Directive
Sensing range (OUT 1 and OUT 2 areas) 3 m 9.843 ft
(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Hysteresis15 % or less of operation distance
(Note：The sensing range is specified for white non-glossy paper (300 x 300 mm 11.811 × 11.811 in) as the object.)
Supply voltage10 to 31 V DC including ripple
Power consumptionUnder operation: 1.5 W or less, Under sleep condition: 0.3 W or less (without auxiliary sensor)
(Note：Obtain the current consumption by the following calculation.
Current consumption = Power consumption ÷ Supply voltage
(e.g.) When the supply voltage is 12 V, the current consumption (operating condition) is: 1.5 W ÷ 12 V = 0.125 A = 125 mA)
OUT1, OUT2NPN open-collector transistor
・Maximum sink current: 100 mA
・Applied voltage: 40 V DC or less between OUT 1 / OUT 2 and 0 V)
・Residual voltage: 1.5 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
* OUT1(OR circuit among the effective center, left, right, adjacent left / right OUT 1 areas and the effective auxiliary left / right areas)
OUT2(OR circuit among the effective center, left and right OUT 2 areas)
OUT1, OUT2:Output operationSelectable either Light-ON or Dark-ON with a switch (Output operation of OUT 1 and OUT 2 is the same.)
OUT1, OUT2:Short-circuit protectionIncorporated
Response time80 ms or less
Operation indicators:OUT 1 areaRed LED (lights up when the beam is received in the effective OUT 1 areas)
Operation indicators:OUT 2 areaYellow LED (lights up when the beam is received in the effective OUT 2 areas)
Sensitivity adjusterContinuously variable adjusters (OUT 1, adjacent right OUT 1, adjacent left OUT 1 and OUT 2 areas are adjusted independently.)
Sensing areaFour sensing areas are selectable with dip switches.
Sleep functionOperating / sleep selectable with external input
Automatic Interference prevention functionOptical interference from up to 25 units is prevented.
ProtectionIP65 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 950 nm 0.037 mil, modulated)
MaterialEnclosure: ABS, Lens: Acrylic, Cover: Polycarbonate
Cable0.3 mm2 5-core cabtyre cable, 0.5 m 1.640 ft long (for input and output)
Cable extensionExtension up to total 100 m 328.084 ft (10 m 32.808 ft for auxiliary sensor connection) is possible with 0.3 mm2, or more, cable.
WeightNet weight: 210 g approx.
Gross weight: 390 g approx.
AccessoryMS-PX-2 (Main sensor mounting bracket): 1 set, Adjusting screwdriver: 1 pc.

MENU

Recently checked products

Recently checked product numbers