Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LS-401｜Digital Laser Sensor LS-400

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

LS-401

Part Number

LS-401

Product

Digital Laser Sensor

Details

Amplifier (Connector type)

Product Name

 Digital Laser Sensor LS-400

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberLS-401
Product NumberLS-401
Products NameDigital Laser Sensor
Product detailsAmplifier (Connector type)
The price of the productPlease contact our office
Operation indicatorOrange LED (lights up when output 1 and output 2 are ON)
Laser emission indicatorGreen LED (lights up during laser emission)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted close together: -10 to +50 ℃ +14 to +122 ℉ , if 8 to 16 units are mounted close together: -10 to +45 ℃ +14 to +113 ℉ )
(No dew condensation or icing allowed),
Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min.
between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm double amplitude or maximum acceleration 49 m/s2 in X, Y, and Z direction for 2 hours each.
Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
MaterialEnclosure: Heat-resistant ABS
Transparent cover: Polycarbonate
Push button switch: Acrylic
Jog switch: ABS
Cable-
(Note) The cable is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (4-core): CN-74-C1 (cable length 1 m 3.281 ft), CN-74-C2 (cable length 2 m 6.562 ft), CN-74-C5 (cable length 5 m 16.404 ft)
Sub cable (2-core): CN-72-C1 (cable length 1 m 3.281 ft), CN-72-C2 (cable length 2 m 6.562 ft), CN-72-C5 (cable length 5 m 16.404 ft)
WeightNet weight: 15 g approx
Gross weight: 20 g approx
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionNormal operation: 950 mW or less (Current consumption 40 mA or less at 24 V supply voltage)
ECO mode: 780 mW or less (Current consumption 33 mA or less at 24 V supply voltage)
Outputs(Output 1, Output 2)NPN open-collector transistor
- Maximum sink current: 100 mA (Note)
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 1.5 V or less [at 100 mA (Note) sink current]
(Note) 50 mA if 5 to 8 connector type amplifiers are connected in cascade , and 25 mA if 9 to 16 connector type amplifiers are connected in cascade.
Outputs(Output 1, Output 2):Output operationSelectable either Light-ON or Dark-ON, with jog switch
Outputs(Output 1, Output 2):Short-circuit protectionIncorporated
Response time80 micro s or less (H-SP), 150 micro s or less (FAST), 500 micro s or less (STD), 4 ms or less (U-LG) selectable with jog switch
External input(Laser emission halt Full-auto teaching / Limit teaching)-
Select indicatorYellow LED
(lights up when either output 1 or output 2 is selected)
MODE indicatorRUN: Green LED
TEACH, L/D, TIMER, CUST, PRO: Yellow LED
Digital display4 digit (green) + 4 digit (red) LED display
Sensitivity settingNormal mode: 2-level teaching / Limit teaching / Full-auto teaching / Manual adjustment
Window comparator mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Hysteresis mode: Teaching (1-level, 2-level, 3-level) / Manual adjustment
Differential mode: 5-level settings
Fine sensitivity adjustment functionIncorporated
Timer functionIncorporated with variable ON-delay / OFF-delay / ONE SHOT timer, switchable either effective or ineffective.
Timer function:Time1 to 9,999 ms
Automatic Interference prevention functionIncorporated
[Up to four sets of sensor heads can be mounted close together. (However, disabled when in H-SP mode)]
Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.

MENU

Recently checked products

Recently checked product numbers