Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EZ-11-PN｜Water Detection Sensor EZ-10

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EZ-11-PN

Part Number

EZ-11-PN

Product

Water Detection Sensor

Details

PNP output

Product Name

 Water Detection Sensor EZ-10

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEZ-11-PN
Product NumberEZ-11-PN
Products NameWater Detection Sensor
Product detailsPNP output
Sensing range5 m 16.404 ft (without container or pipe)
(Note):The sensing range shortens depending on the thickness, material, color, etc., of the container or pipe.
Sensing objectø12 mm ø0.472 mm or more liquid which contains water, or opaque object
(Note):If there are two slit masks on both sides, the size of those slit masks represents the min. sensing object.
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 25 mA or less, Receiver: 25 mA or less
OutputPNP open-collector transistor
・Maximum source current: 100 mA
・Applied voltage: 30 V DC or less (between output and +V)
・Residual voltage: 1.5 V or less (at 100 mA source current)
0.4 V or less (at 16 mA source current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationSwitchable either Light-ON or Dark-ON
Output:Short-circuit protectionSwitchable either Light-ON or Dark-ON
Response time12 ms or less
Sensitivity adjusterContinuously variable adjuster
ProtectionIP67 (IEC)
Ambient temperature0 to +55 ℃ +32 to +131℉ (No dew condensation allowed), Storage: -30 to +70 ℃ -22 to +158℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (modulated)
MaterialPolycarbonate
WeightEmitter: 45 g approx., Receiver: 50 g approx.
AccessoryAdjusting screwdriver: 1 pc.
DimensionsW12 x H31 x D20 mm W0.472 x H1.221 x D0.787 in

MENU

Recently checked products

Recently checked product numbers