Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-L291｜Amplifier Built-in Ultra-compact Laser Sensor EX-L200

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EX-L291

Part Number

EX-L291

Product

Amplifier Built-in Ultra-compact Laser Sensor

Details

Retroreflective type

Product Name

 Amplifier Built-in Ultra-compact Laser Sensor EX-L200

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEX-L291
Product NumberEX-L291
Products NameAmplifier Built-in Ultra-compact Laser Sensor
Product detailsRetroreflective type
The price of the productPlease contact our office
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Sensing range4 m 13.123 ft
(Note)The sensing range is specified for white non-glossy papar (100 x 100 mm 3.937 x 3.937 in) as the object.
Emission spot size (Typical)Approx. 6 × 4 mm 0.236 × 0.157 in (vertical x horizontal)
(at a sensing distance of 1 m)
(Note) In the case sensing distance is 4 m 13.123 ft, the emission spot size is H 18 x W 10 mm H 0.709 x W 0.394 in (visual reference value).
Sensing objectOpaque translucent object of ø25 mm ø0.984 in or more
Minimum sensing object (Typical)-
Hysteresis20 % or less of operation distance
RepeatabilityPerpendicular to sensing axis: 0.2 mm 0.0080 in or less
Repeatability (Typical)(perpendicular to sensing axis)-
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption15 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 26.4 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current)
Output:Output operationLight-ON / Dark-ON selectable by the output operation switching input
Output:Short-circuit protectionIncorporated (short-circuit protection / inverse polarity protection)
Response time0.5 ms or less
Automatic Interference prevention functionIncorporated
(Two sensors can be mounted close together.)
Sensitivity adjusterContinuously variable adjuster
ProtectionIP67 (IEC)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or no icing condition),
Storage: -30 to +70 ℃ -22 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude (10 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementRed semiconductor laser Class 1 (IEC / JIS/ FDA/ GB/ EN/ KS) (Note：This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 56, dated May 8, 2019, issued by CDRH
(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)
(Maximum output: 0.5 mW, Peak emission wavelength: 655 nm 0.026 mil)
MaterialEnclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate
Cable0.15 mm2 4-core (emitter of a thru-beam type: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 45 g approx
Gross weight: 60 g approx
AccessoryRF-330 (Reflector): 1 pc.
MS-EXL2-3 (Mounting plate): 1 pc.

MENU

Recently checked products

Recently checked product numbers