Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-F72｜Leak Detection Sensor EX-F70/EX-F60

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    EX-F72

    Part Number

    EX-F72

    Product

    Leak Detection Sensor

    Details

    General purpose

    Product Name

    		 Leak Detection Sensor EX-F70/EX-F60
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberEX-F72
    Product NumberEX-F72
    Products NameLeak Detection Sensor
    Product detailsGeneral purpose
    Sensing objectWater, Fluorinert™
    Note:Highly viscous liquid may not be detected stably.
    Note:Fluorinert is the world wide trademark of 3M.
    Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
    Current consumption10 mA or less(PNP output type: 15 mA or less)
    OutputNPN open-collector transistor
    - Maximum sink current: 50 mA
    - Applied voltage: 30 V DC or less (between output and 0 V)
    - Residual voltage: 1.0 V or less (at 50 mA sink current), 0.4 V or less (at 16 mA sink current)
    Output:Output operationIn normal state: ON, When leak detected or the sensor is mounted improperly: OFF
    Output:Short-circuit protectionIncorporated
    Response time50 ms or less
    FAULT indicatorRed LED (lights up when the leak liquid is detected, or the sensor is mounted improperly)
    NORMAL indicatorGreen LED (lights up when the sensor is mounted properly)
    ProtectionIP67 (IEC)
    Ambient temperature-10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉
    Note : Liquid being detected should also be kept within the rated ambient temperature range.
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 1,000 ℓx or less at the light-receiving face
    Emitting elementInfrared LED (non-modulated)
    MaterialEnclosure: Polypropylene
    Cable0.1 mm2 3-core PVC cabtyre cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
    WeightNet weight: 25 g approx.
    AccessoryMS-EX-F7-2, MS-EX-F7-3(PVC mounting bracket) : 1 pc.
    Note : The mounting bracket for EX-F71(-PN) is not interchangeable with that of EX-F72(-PN) due to the different sensitivity settings of each sensor.
    each for two-point-fixing and adhesive-fixing

    MENU

    Recently checked products

    Recently checked product numbers