Cylindrical Photoelectric Sensor CY-100 SERIES (Discontinued Products)

Download

Discontinued Products
Specifications
Dimensions
Circuit/ Wiring
Cautions For Use

Ⅾiscontinued

Last time buy (JST)

July 14, 2023

We are sorry, the products have been discontinued. Please refer to the details of the discontinued products and the recommended substitutes list below.

------------------------------ Tab1 showing ------------------------------

Discontinued Products

------------------------------ Tab2 showing ------------------------------

Type		Thru-beam
Type		Standard	Side view
Model No.	Light-ON	CY-111A□	CY-111VA□
Model No.	Dark-ON	CY-111B□	CY-111VB□
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		15 m 49.213 ft
Sensing object		φ18 mm φ0.709 in or more opaque object (Setting distance between emitter and receiver: 15 m 49.213ft)
Hysteresis		-
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		Emitter: 35 mA or less Receiver: 35 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 24 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less <PNP output type> PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 24 V DC or less (between output and +V) • Residual voltage: 1.5 V or less
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		1 ms or less
Test input (emission halt) function		Incorporated
Operation indicator		Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Power indicator		Green LED (lights up when the power is ON) (incorporated on the emitter)
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC)
Ambient temperature		–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity		50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance		Incandescent light: 5,000 ℓx or less at the light-receiving face
Voltage withstandability		500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 0.5 mm 0.02 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance		294 m/s² acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element		Infrared LED (modulated)
	Peak emission wavelength	890 nm 0.035 mil
Material		Enclosure: PBT, Lens: PMMA
Cable (except for M12 plug-in connection type)		0.44 mm² 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension		Extension up to total 10 m 32.808 ft is possible with 0.34 mm², or more, cable (thru-beam type: both emitter and receiver).
Net weight (Note 5)	2 m cable length type	Emitter/Receiver: 65 g approx.	Emitter/Receiver: 70 g approx.
Net weight (Note 5)	M12 plug-in connector type	Emitter/Receiver: 15 g approx.	Emitter/Receiver: 20 g approx.
Accessories		Nut: 4 pcs.

Type		Retroreflective
				With polarizing filters
		Standard	Side view	Standard	Side view
Model No.	Light-ON	CY-192A□	CY-192VA□	CY-191A□	CY-191VA□
Model No.	Dark-ON	CY-192B□	CY-192VB□	CY-191B□	CY-191VB□
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		4 m 13.123 ft (Note 2)		2 m 6.562 ft (Note 2)
Sensing object		φ50 mm φ1.969 in or more opaque, translucent or transparent object (Note 2, 4)		φ50 mm φ1.969 in or more opaque, translucent, transparent or specular object (Note 2, 4)
Hysteresis		-
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		35 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 24 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less <PNP output type> PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 24 V DC or less (between output and +V) • Residual voltage: 1.5 V or less
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		1 ms or less
Test input (emission halt) function		-
Operation indicator		Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Power indicator		-
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC)
Ambient temperature		–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity		50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance		Incandescent light: 5,000 ℓx or less at the light-receiving face
EMC		EN 60947-5-2
Voltage withstandability		500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance		294 m/s² acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element		Infrared LED (modulated)		Red LED (modulated)
	Peak emission wavelength	875 nm 0.034 mil		665 nm 0.026 mil
Material		Enclosure: PBT, Lens: PMMA
Cable (except for M12 plug-in connection type)		0.44 mm² 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension		Extension up to total 10 m 32.808 ft is possible with 0.34 mm², or more, cable (thru-beam type: both emitter and receiver).
Net weight (Note 5)	2 m cable length type	65 g approx.	70 g approx.	65 g approx.	70 g approx.
Net weight (Note 5)	M12 plug-in connector type	15 g approx.	20 g approx.	15 g approx.	20 g approx.
Accessories		Nut: 2 pcs.

Type		Diffuse reflective
				With sensitivity adjuster
		Standard	Side view	Standard	Side view
Model No.	Light-ON	CY-121A□	CY-121VA□	CY-122A□	CY-122VA□
Model No.	Dark-ON	CY-121B□	CY-121VB□	CY-122B□	CY-122VB□
CE marking directive compliance		EMC Directive, RoHS Directive
Sensing range		100 mm 3.937 in (Note 3)		600 mm 23.622 in (Note 3)
Sensing object		Opaque, translucent or transparent object (Note 4)
Hysteresis		3 to 15 % of operation distance (Note 3)
Supply voltage		12 to 24 V DC ±10 % Ripple P-P 10 % or less
Current consumption		35 mA or less
Output		<NPN output type> NPN open-collector transistor • Maximum sink current: 100 mA • Applied voltage: 24 V DC or less (between output and 0 V) • Residual voltage: 1.5 V or less <PNP output type> PNP open-collector transistor • Maximum source current: 100 mA • Applied voltage: 24 V DC or less (between output and +V) • Residual voltage: 1.5 V or less
	Utilization category	DC-12 or DC-13
	Short-circuit protection	Incorporated
Response time		1 ms or less
Test input (emission halt) function		-
Operation indicator		Yellow LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type)
Power indicator		-
Pollution degree		3 (Industrial environment)
Protection		IP67 (IEC)
Ambient temperature		–25 to +55 ℃ –13 to +131 ℉ (No dew condensation or icing allowed), Storage: –40 to +70 ℃ –22 to +158 ℉
Ambient humidity		50 % RH (at +70 ℃ +158 ℉)
Ambient illuminance		Incandescent light: 5,000 ℓx or less at the light-receiving face
EMC		EN 60947-5-2
Voltage withstandability		500 V AC for one min. between all supply terminals connected together and enclosure
Vibration resistance		10 to 55 Hz frequency, 0.5 mm 0.020 in double amplitude in X, Y and Z directions for 1.5 hours each
Shock resistance		294 m/s² acceleration (30 G approx.) in X, Y and Z directions three times each
Emitting element		Infrared LED (modulated)
	Peak emission wavelength	875 nm 0.034 mil
Material		Enclosure: PBT, Lens: PMMA
Cable (except for M12 plug-in connection type)		0.44 mm² 3-core cabtyre cable, 2 m 6.562 ft long
Cable extension		Extension up to total 10 m 32.808 ft is possible with 0.34 mm², or more, cable (thru-beam type: both emitter and receiver).
Net weight (Note 5)	2 m cable length type	65 g approx.	70 g approx.		75 g approx.
Net weight (Note 5)	M12 plug-in connector type	15 g approx.	20 g approx.		25 g approx.
Accessories		Nut: 2 pcs.

Notes:
1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.
2) The sensing range and the sensing object of the retroreflective type sensor are specified for the RF-420 reflector (optional).
3) The sensing range and the hysteresis of the diffuse reflective type sensor are specified for white non-glossy paper (200 × 200 mm 7.874 × 7.874 in) as the object.
4) Make sure to confirm detection with an actual sensor before use for detection of the transparent object and the translucent object.
5) The weight includes the weight of nuts.

------------------------------ Tab3 showing ------------------------------

Unit: mm in

CY-1□

Sensor

	2 m cable length type (mm in)		M12 plug-in connector type (mm in)
	a	b	a	b
Standard type CY-111□/121□/192□	46 1.811	28 1.102	60 2.362	28 1.102
Standard type CY-191□	48 1.890	28 1.102	62 2.441	28 1.102
Side view type CY-111V□/121V□/191V□/192V□	62 2.441	28 1.102	76 2.992	28 1.102
Standard type CY-122□	62 2.441	44 1.732	76 2.992	44 1.732
Side view type CY-122V□	78 3.071	44 1.732	92 3.622	44 1.732

CN-24C-C2
CN-24C-C5

Mating cable

CN-24CL-C2
CN-24CL-C5

Mating cable

MS-CY1-1

Sensing mounting bracket

MS-CY1-2

Sensing mounting bracket

MS-AJ3

Universal sensor mounting stand

1. Ball-joint mounted fixing bracket CY-100 series or RF-420

2. M12 rod

3. Support for M12 rod

RF-420

Reflector

RF-410

Reflector

------------------------------ Tab4 showing ------------------------------

------------------------------ Tab5 showing ------------------------------

Mounting

The tightening torque should be 3 N·m or less.
Use a cable with connector CN-24C(L)-C□ (optional) for M12 connector type.
Tightening torque for connector part is 2 N·m or less.

Mounting drawing with sensor or reflector RF-420

Wiring

Make sure that the power supply is off while wiring.
Verify that the supply voltage variation is within the rating.
If power is supplied from a commercial switching regulator, ensure that the frame ground (F.G.) terminal of the power supply is connected to an actual ground.
Ensure that an isolation transformer is utilized for the DC power supply.
If an autotransformer is utilized, the main body or power supply may be damaged.
If the used power supply generates a surge, connect a surge absorber to the power supply to absorb the surge.
Do not use during the initial transient time (0.5 sec) after the power supply is switched on.
In case noise generating equipment (switching regulator, inverter motor, etc.) is used in the vicinity of this product, connect the frame ground (F.G.) terminal of the equipment to an actual ground.
Do not run the wires together with high-voltage lines or power lines or put them in the same raceway.
This can cause malfunction due to induction.
Damage or burnout may result in case of short circuit of load or miswiring.
Make a cable length as short as possible to lessen noise pickup.

Others

This device has been developed / produced for industrial use only.
Take care that the sensor is not directly exposed to fluorescent lamp from a rapid-starter lamp or a high frequency lighting device, as it may affect the sensing performance.
Avoid using a product where there is excessive vapor, dust or corrosive gas,
or in a place where it could be exposed directly to water or chemicals.
Take care that the sensor does not come in direct contact with water, oil, grease or organic solvents,
such as, thinner, etc.
Do not use in an environment containing infammable or explosive gases.
Never disassemble or modify the product.

Cylindrical Photoelectric Sensor CY-100 SERIES (Discontinued Products)

Discontinued Products

Specifications