Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

PM-T64P｜Connector Built-in U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-64(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    PM-T64P

    Part Number

    PM-T64P

    Product Name

    		 Connector Built-in U-shaped Micro Photoelectric Sensor[Amplifier Built-in] PM-64(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberPM-T64P
    Product NumberPM-T64P
    The price of the productPlease contact our office
    Sensing range5 mm 0.197 in (fixed)
    Minimum sensing object0.8 x 1.8 mm 0.031 x 0.071 in opaque object
    Hysteresis0.05 mm 0.002 in or less
    (Note) This is the value when a sensing object is moved in a lateral direction to the U-shape.
    Repeatability0.01 mm 0.004 in or less
    (Note) This is the value when a sensing object is moved in a lateral direction to the U-shape and when the inserting length of the sensing board is 5 mm 0.197 in.
    Supply voltage5 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
    Current consumption15 mA or less
    OutputPNP open-collector transistor
    Maximum source current: 50 mA
    Applied voltage: 30 V DC or less (between output and +V)
    Residual voltage: 0.7 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
    Output:Output operationIncorporated with 2 outputs: Light-ON / Dark-ON
    Response timeUnder light received condition: 20 micros or less, Under light interrupted condition: 100 micros or less(Response frequency: 1 kHz or more)
    Operation indicatorOrange LED (lights up under light received condition)
    Ambient temperature-25 to +55 degrees -13 to +131degrees Fahrenheit(No dew condensation or icing allowed), Storage: -30 to +80 degrees -22 to +176degrees Fahrenheit
    Ambient humidity35 to 85 % RH, Storage: 5 to 95 % RH
    Ambient illuminanceFluorescent light: 1,000 lx at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    Insulation resistance50 MOhm, or more, with 250 V DC megger between all supply terminals connected together and enclosure
    Vibration resistance10 to 2,000 Hz frequency, 1.5 mm 0.059 in amplitude in X, Y and Z directions for two hours each
    Shock resistance15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions for three times each
    Emitting elementInfrared LED(Peak emission wavelength: 940 nm 0.037 mil, non-modulated)
    MaterialEnclosure: PBT, Slit cover: Polycarbonate
    Wiring lengthTotal length up to 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
    (Note) Confirm that the sensor terminal voltage is more than 4.5 V when using an extension of over 20 m 65.617 ft.
    WeightNet weight: 3 g approx.

    MENU

    Recently checked products

    Recently checked product numbers