Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

FX-11A｜Slim Body Analog Fiber Sensor FX-11A(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    FX-11A

    Part Number

    FX-11A

    Product

    Slim Body Analog Fiber Sensor

    Details

    Amplifier

    Product Name

    		 Slim Body Analog Fiber Sensor FX-11A(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberFX-11A
    Product NumberFX-11A
    Products NameSlim Body Analog Fiber Sensor
    Product detailsAmplifier
    Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
    Current consumption35 mA or less
    Analog outputAnalog voltage
    ・Output voltage: 1 to 5 V (proportional to incident light intensity)
    ・Output current: 5 mA or less
    ・Output impedance: 47 Ω
    ・Load resistance: 2 kΩ or more
    ・Temperature characteristics: 0.3 % F.S./℃ or less
    Response timeSwitchable either 1 ms or less, or 10 ms or less
    Incident beam indicatorRed LED (brightens up in proportion to analog output voltage)
    Saturation indicatorGreen LED (lights up when the analog output voltage reaches 5 V)
    Sensitivity adjuster8-turn potentiometer with indicator
    Interference prevention functionIncorporated
    Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
    Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Ambient illuminanceIncandescent light: 1,000 lx at the light-receiving face
    Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
    (Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
    Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
    (Note):The voltage withstandability and the insulation resistance values given in the above table are for the amplifier only.
    Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
    Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions for five times each
    Emitting elementRed LED (Peak emission wavelength: 660 nm 0.026 mil, modulated)
    MaterialEnclosure: Heat-resistant ABS, Case cover: Polycarbonate, Fiber lock lever: PES
    Cable0.2 mm2 4-core cabtyre cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.
    (Note):Take care that the output voltage drops when the cable is extended.
    WeightNet weight: 60 g approx., Gross weight: 100 g approx.
    AccessoryMS-DIN-2 (Amplifier mounting bracket): 1 pc., Adjusting screwdriver: 1 pc.

    MENU

    Recently checked products

    Recently checked product numbers