------------------------------ Tab1 showing ------------------------------
Basic Information
Features
Lens for fiber
For details of lens for fiber, refer to "Lens for thru-beam type fiber" or "Lens for reflective type fiber".
>>Go to "Lens for thru-beam type fiber"
>>Go to "Lens for reflective type fiber"
Accessories (attached with fibers)
| Designation | Appearance | Model No. | Description |
|---|---|---|---|
| Reflector |
| RF-003 | FR-KZ50E/KZ50H exclusive reflector |
| Reflective tape |
| RF-13 | FR-Z50HW reflective tape |
| Fiber cutter |
| FX-CT2 | Fiber cutter |
| FX-CT3 | Fiber cutter for ø1mm ø0.039 in/ø1.3mm ø0.051 in fiber cable / ø4mm ø0.157 in protective tube | |
| FX-CT4 | Fiber cutter for ø2mm ø0.079 in fiber cable / ø4mm ø0.157 in protective tube | |
| Attachment |
| FX-AT2 | Attachment for fixed-length fiber, Orange |
| FX-AT3 | Attachment for ø2.2 mm ø0.087 in fiber, Clear orange | |
| FX-AT4 | Attachment for ø1 mm ø0.039 in fiber, Black | |
| FX-AT5 | Attachment for ø1.3 mm ø0.051 in fiber, Gray | |
| FX-AT6 | Attachment for ø1 mm ø0.039 in / ø1.3 mm ø0.051 in mixed fiber, Black / Gray | |
| FX-AT7 | Attachment for ø7 mm ø0.276 in fiber, Black / Blue | |
| Mouting bracket |
| MS-FD-2 | Mouting bracket for fiber |
| MS-FD-F7-1 | SUS mounting bracket for FD-F71 | |
| MS-FD-F7-2 | PVC mounting bracket for FD-F71 | |
| Slit mask |
| FX-SL1 | Applicable fiber : FT-A11 / FT-A11W Slit size : 0.5×12 mm [One pair set] |
| FX-SL2 | Applicable fiber : FT-A11 / FT-A11W Slit size : 1×12 mm [One pair set] | |
| FX-SL3 | Applicable fiber : FT-A32 / FT-A32W Slit size : 0.5×33 mm [One pair set] |
Others
Protective tube
・FTP-□
・FDP-□
Single core holder
・FX-AT15A
Universal sensor mounting stand
Using the arm which enables adjustment in the horizontal direction, sensing can also be done from above an assembly line.
・MS-AJ1-F
・MS-AJ2-F
Liquid inflow prevention joint
・MS-FX-01Y
Protective tube extension joint
・MS-FX-02Y
Fiber mounting joint
・MS-FX-03Y
Gland single
・FX-AT4G1
・FX-AT5G1
・FX-AT6G1
Reflector
・RF-210
・RF-220
・RF-230
| Designation | Model No. | Description | |||
|---|---|---|---|---|---|
| Protective tube (For thru-beam type fiber) | FTP-500 (0.5m 1.640 ft) | For M4 thread | Applicable fibers | FT-42 FT-42S FT-42W FT-43 FT-H13-FM2 | The protective tube, made of noncorrosive stainless steel, protects the inner fiber cable from any external forces. |
| FTP-1000 (1m 3.281 ft) | |||||
| FTP-1500 (1.5m 4.921 ft) | |||||
| FTP-N500 (0.5m 1.640 ft) | For M3 thread | FT-31 FT-31S FT-31W FD-31 FD-31W | |||
| FTP-N1000 (1m 3.281 ft) | |||||
| FTP-N1500 (1.5m 4.921 ft) | |||||
| Protective tube (For reflective type fiber) | FDP-500 (0.5m 1.640 ft) | For M6 thread | FD-61 FD-61G FD-61S FD-61W FD-62 FD-H13-FM2 | ||
| FDP-1000 (1m 3.281 ft) | |||||
| FDP-1500 (1.5m 4.921 ft) | |||||
| FDP-N500 (0.5m 1.640 ft) | For M4 thread | FD-41 FD-41W FD-41S FD-41SW | |||
| FDP-N1000 (1m 3.281 ft) | |||||
| FDP-N1500 (1.5m 4.921 ft) | |||||
| Universal sensor mounting stand (Note 1) | MS-AJ1-F | Horizontal mounting type | Mounting stand assembly for fiber (For M3, M4 or M6 threaded head fiber) | ||
| MS-AJ2-F | Vertical mounting type | ||||
| Liquid inflow prevention joint (Note 1) | MS-FX-01Y | Applicable fibers | FD-HF40Y FD-F41Y | This joint suppresses false operations due to liquid slip-in from the top of the protective tube. | |
| Protective tube extension joint (Note 1) | MS-FX-02Y | The protective tube can be extended. | |||
| Fiber mounting joint (Note 1) | MS-FX-03Y | The joint is used for mounting fibers on a tank. | |||
| Single core holder | FX-AT15A | The incident light intensity may vary when using a multi-core fiber or a thin type sharp bending fiber. This holder suppresses the variation in the incident light intensity. (Brown) | |||
| Gland single | FX-AT4G1 | Gland single for ø1mm ø0.039in fiber, Black | |||
| FX-AT5G1 | Gland single for ø1.3mm ø0.051in fiber, Gray | ||||
| FX-AT6G1 | Gland single for ø1mm ø0.039in / ø1.3mm ø0.051in mixed fiber, Black / Gray | ||||
| Reflector | RF-210 | It is available for FR-Z50HW. Refer to Retroreflective Type Fiber for the sensing range of FR-Z50HW to be used in combination. | |||
| RF-220 | |||||
| RF-230 | |||||
(Note 1):The joint internal ferrule (MS-FX-YF) is available as a spare part. A distorted ferrule may result in leakage.
Discontinued products [Order accepted till September, 2022]
------------------------------ Tab2 showing ------------------------------
Dimensions
- Unit: mm in
FTP-□
FDP-□
Protective tube (Optional)
FTP-□, FDP-N□
FTP-N□
FDP-□
・Length L
| Model No. | Length L |
|---|---|
| FTP-500, FTP-N500, FDP-N500, FDP-500 | 500+10019.685+0.3940 |
| FTP-1000, FTP-N1000, FDP-N1000, FDP-1000 | 1,000+10039.370+0.3940 |
| FTP-1500, FTP-N1500, FDP-N1500, FDP-1500 | 1,500+10059.055+0.3940 |
FV-BR1
Photo-terminal (for vacuum-resistant) (with vacuum-resistant fiber)
FX-AT2
Attachment for fixed-length fiber (Accessory for fixed-length fiber)
Material: POM
FX-AT3
Attachment for φ2.2 mm φ0.087 in fiber
(Accessory for φ2.2 mm φ0.087 in fiber)
Material: Polycarbonate
FX-AT4
Attachment for φ1 mm φ0.039 in fiber
(Accessory for φ1 mm φ0.039 in fiber)
Material:Holder...PAGround...POM
FX-AT5
Attachment for φ1.3 mm φ0.051 in fiber
(Accessory for φ1.3 mm φ0.051 in fiber)
Material:Holder.....PAGround.....POM
FX-AT6
Attachment for φ1 mm φ0.039 in / φ1.3 mm φ0.051 in mixed fiber
(Accessory for φ1 mm φ0.039 in / φ1.3 mm φ0.051 in mixed fiber)
Material:Holder.....PAGround.....POM
FX-CT2
Fiber cutter (Accessory for free-cut type fiber)
Material: ABS
MS-FD-2
Fiber mounting bracket
Accessory for FD-Z50HW, FR-KZ50E/KZ50H/Z50HW, FD-H30-KZ1V-S
Material: Stainless steel (SUS304)
MS-FD-3
Fiber mounting bracket
Accessory for FT-KV40/FT-KV40W
Material: Stainless steel (SUS304)
RF-003
Reflector for FR-KZ50E/KZ50H
Accessory for FR-KZ50E/KZ50H
RF-13
Reflective tape for FR-Z50HW
Accessory for FR-Z50HW
Material : Acrylic (Reflective surface)
RF-210
Reflector (Optional)
Material:Acrylic (Reflector)ABS (Base)Two M3 (length 8 mm0.315 in) screws with washers and two nuts are attached.
RF-220
Reflector (Optional)
Material:Acrylic (Reflector)ABS (Base)
RF-230
Reflector (Optional)
Material:Acrylic (Reflector)ABS (Base)
FB-1 [Discontinued products]
Fiber bender (Optional)
Material: PP (Containing steel blade)
寸法図
単位mm
FTP-□
FDP-□
プロテクトチューブ(別売)
FTP-□
FDP-N□
FTP-N□
FDP-□
・長さL
| 型式名 | 長さL |
|---|---|
| FTP-500、FTP-N500、FDP-N500、FDP-500 | 500+100 |
| FTP-1000、FTP-N1000、FDP-N1000、FDP-1000 | 1,000+100 |
| FTP-1500、FTP-N1500、FDP-N1500、FDP-1500 | 1,500+100 |
FV-BR1
光導入端子(耐真空用)(耐真空ファイバに付属)
FX-AT2
定尺ファイバ用アタッチメント(定尺ファイバに付属)
材質：POM
FX-AT3
ø2.2mmファイバ用アタッチメント
(ø2.2mmファイバに付属)
材質：ポリカーボネート
FX-AT4
ø1mmファイバ用アタッチメント
(ø1mmファイバに付属)
材質：
ホルダ..... PA
グランド..... POM
FX-AT5
ø1.3mmファイバ用アタッチメント
(ø1.3mmファイバに付属)
材質：
ホルダ..... PA
グランド..... POM
FX-AT6
ø1mm／ø1.3mm混合ファイバ用アタッチメント
(ø1mm／ø1.3mm混合ファイバに付属)
材質：
ホルダ..... PA
グランド..... POM
FX-CT2
ファイバカッタ(フリーカットタイプのファイバに付属)
材質： ABS
MS-FD-2
ファイバ取付金具
FD-Z50HW、FR-KZ50E/KZ50H/Z50HW、FD-H30-KZ1V-Sに付属
材質 ： SUS304
MS-FD-3
ファイバ取付金具
FT-KV40、FT-KV40Wに付属
材質 ： SUS304
RF-003
FR-KZ50E/KZ50H用反射ミラー
FR-KZ50E/KZ50Hに付属
RF-13
FR-Z50HW用反射テープ
FR-Z50HWに付属
材質：アクリル(反射面)
RF-210
反射ミラー（別売）
材質 ：
アクリル（リフレクタ）
ABS（ベース）
Ｍ3（長さ8mm）座金組込ビス2本、ナット2個付属
RF-220
反射ミラー（別売）
材質 ：
アクリル（リフレクタ）
ABS（ベース）
RF-230
反射ミラー（別売）
材質 ：
アクリル（リフレクタ）
ABS（ベース）
FB-1[受注終了品]
ファイバベンダ(別売)
材質：PP、鉄芯入