Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

CA2-T2｜Ultra-compact Digital Panel Controller CA2(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    CA2-T2

    Part Number

    CA2-T2

    Product

    Ultra-compact Digital Panel Controller

    Product Name

    		 Ultra-compact Digital Panel Controller CA2(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberCA2-T2
    Product NumberCA2-T2
    Products NameUltra-compact Digital Panel Controller
    Supply voltage24 V DC ± 10 % Ripple P-P 10 % or less
    Power consumption2.8 W or less
    Analog inputs : Input range1 to 5 V
    Analog inputs : Input impedance1 MΩ
    Analog inputs : No. of inputs1 No.
    Analog inputs : Input methodSingle end input
    Analog inputs : A/D conversion methodSuccessive approximation method
    Analog inputs : Sampling rateSelectable from 200 times/sec., 20 times/sec., 10 times/sec. or 5 times/sec.
    Zero-adjust input (0-ADJ.) / Auto-reference input (A-REF.)Input condition: Non-voltage contact or NPN open-collector transistor input
    Signal condition: Negative logic, Input time duration 10 ms or more
    Signal level: ON ... 1.5 V or less (output current: 10 mA or less), OFF ... Supply voltage or open
    Guaranteed No. of zero-adjust input usage: 10 million times or less (for zero-adjust back-up setting)
    Start / hold inputHigh level (supply voltage, or open): Start, Low level (1.5 V or less): Hold
    Comparative outputs (OUT 1, OUT 2)NPN open-collector transistor
    ・ Maximum sink current: 100 mA
    ・ Applied voltage: 35 V DC or less (between comparative output and GND)
    ・ Residual voltage:1.3 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
    Comparative outputs(OUT 1, OUT 2) : Response time5 ms or less
    (when start / hold input is used at a sampling rate of 200 times/sec.)
    Comparative outputs(OUT 1, OUT 2) : HysteresisVariable from 1 to 3,999 digits
    Display4 digit 7-segment red LED display
    (letter height: 8 mm 0.315 in)
    Display : Display refresh rateSelectable from 20 times/sec., 10 times/sec., 5 times/sec., 2.5 times/sec., 1 time/sec. or 0.5 time/sec.
    Display : Display rangeSelectable span of 4,000 Nos. between -9999 to +9999 is displayed. ("+" is not displayed)
    Display : Display accuracy±(0.1 % F.S. + 1 digit) at 23 ± 5 ℃ 73.4 ± 41 ℉, 35 to 85 % RH
    Display : Temperature characteristics±0.5 % F.S. over 0 to +50 ℃ +32 to +122 ℉
    Setting resolution1 digit
    Threshold value setting range-9999 to +9999
    Indicators : Polarity indicationRed LED
    (lights up when the displayed value or the threshold value is negative)
    Indicators : OUT 1 operationOrange LED
    (Measurement mode: Lights up when OUT 1 is ON. Blinks when display is changed to OUT 1 threshold value display.
    Setting mode: Blinks when OUT 1 threshold value and comparison conditions are set or when zero scale of scale setting function is set.)
    Indicators : OUT2 operationOrange LED
    (Measurement mode: Lights up when OUT 2 is ON. Blinks when display is changed to OUT 2 threshold value display.
    Setting mode: Blinks when OUT 2 threshold value and comparison conditions are set or when full scale of scale setting function is set.)
    Indicators : Auto-reference operationGreen LED
    (lights up when auto-reference function is used)
    FunctionsAuto-reference function, zero-adjust function, scale setting function, threshold value setting function, hysteresis setting function, comparative output timer function, start / hold function, memory clear function, power supply ON-delay function etc.
    Environmental resistance : Ambient temperature0 to +55 ℃ +32 to +131 ℉ (No dew condensation), Storage: -20 to +70 ℃ -4 to +158 ℉
    Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Environmental resistance : Voltage withstandability1,500 V AC for one min. between all supply terminals connected together and enclosure
    Environmental resistance : Insulation resistance100 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
    Environmental resistance : Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
    Environmental resistance : Shock resistance294 m/s2 (30 G) acceleration in X, Y and Z directions three times each
    Back-up memoryNon-volatile memory (EEPROM), Guaranteed write operations: 1,000,000 or less
    MaterialEnclosure: Polycarbonate
    Connecting methodTerminal block connection
    Net weightNet weight: 55 g approx.

    MENU

    Recently checked products

    Recently checked product numbers