{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HL-D3C｜High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    HL-D3C

    Part Number

    HL-D3C

    Product

    High Speed, Multi-Point Laser Displacement Sensor

    Details

    Controller

    Product Name

    		 High Speed, Multi-Point Laser Displacement Sensor HL-D3(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberHL-D3C
    Product NumberHL-D3C
    Products NameHigh Speed, Multi-Point Laser Displacement Sensor
    Product detailsController
    Applicable sensor headsHL-D301B, HL-D301C
    Connectable sensor headsNumber of connectable units: Max. 2 units
    Supply voltage24 V DC ±10 % including ripple 0.5 V (P-P)
    Current consumption1 A or less (when 2 sensor heads are connected)
    Sampling rateDepends on the sensing mode and settings
    Multi-zone beam control mode : Standard 12.2 ms (Note 1)
    Whole synchronized measurement mode : Max. 2.5 ms (Note 2)
    Multi-select displacement sensing mode : Max. 80 μs (Note 3)
    (Note 1):Value for using two judgment outputs with 1 sensor head in MZBC mode, with each measuring range set to Max. and light intensity not adjusted (continuous sensing).
    (Note 2):Value for obtaining displacement shape waveform data using buffering and 2 sensor heads in whole synchronized measurement mode, with each measuring range set to Min. (no OUT calculation).
    (Note 3):Value for using 2 judgment outputs with 1 sensor head in MSDS mode, with the unit light receiving time set to 40 μs, light intensity not adjusted (continuous), and 2 points selected (without wide cell function).
    Judgment outputN-channel FET, open drain
    • Maximum sink current: 100 mA
    • Applied voltage: 30 V DC or less (between output terminal and 0 V)
    • ON-resistance: 5 Ω or less
    Judgment output : Output operationOpen during output operation (switchable)
    Judgment output : Short-circuit protectionIncorporated
    Alarm outputN-channel FET, open drain
    • Maximum sink current: 100 mA
    • Applied voltage: 30 V DC or less (between output terminal and 0 V)
    • ON-resistance: 5 Ω or less
    Alarm output : Output operationOpen when alarm is triggered (switchable)
    Alarm output : Short-circuit protectionIncorporated
    External trigger inputPhotocoupler insulation input
    External trigger input : Input operationON: short-circuiting to external insulation COM (-) , OFF: when open
    External trigger input : Applied voltage30 V DC or less (leakage current: 0.1 mA or less)
    Laser control inputPhotocoupler insulation input
    Laser control input : Input operationLaser emission: short-circuiting to external insulation COM (-) , Laser emission OFF: when open
    Laser control input : Applied voltage30 V DC or less (leakage current: 0.1 mA or less)
    Zero set inputPhotocoupler insulation input
    Zero set input : Input operationON: short-circuiting to external insulation COM (-) , OFF: when open
    Zero set input : Applied voltage30 V DC or less (leakage current: 0.1 mA or less)
    Timing inputPhotocoupler insulation input
    Timing input : Input operationON: short-circuiting to external insulation COM (-) , OFF: when open
    Timing input : Applied voltage30 V DC or less (leakage current: 0.1 mA or less)
    Reset inputPhotocoupler insulation input
    Reset input : Input operationON: short-circuiting to external insulation COM (-) , OFF: when open
    Reset input : Applied voltage30 V DC or less (leakage current: 0.1 mA or less)
    RS-232C interfaceBaud rate: 9,600, 19,200, 38,400, 57,600, 115,200 bit/s(Note):Products produced from September 2013 (Ver. 2) are also compatible with 9,600, 19,200 and 38,400 bit/s.
    USB interfaceUSB 2.0 full-speed (USB 1.1 compatible)
    Settings / Data displayHL-D3SMI (accessory) or dedicated API
    Indicator : PowerGreen LED (lights up at power on)
    Indicator : Sensor head A Laser radiationGreen LED
    [During continuous sensing: lights up during laser emission, blinks twice when turning off
    During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
    Indicator : Sensor head B Laser radiationGreen LED
    [During continuous sensing: lights up during laser emission, blinks twice when turning off
    During sensing stop process: alternately lights up during laser emission (ON: 1 sec / OFF: 1 sec), blinks once when turning off]
    Indicator : AlarmRed LED
    (lights up when there is a sensing alarm or sensor head wire breakage)
    Environmental resistance : Ambient temperature0 to +50 ℃ +32 to +122 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
    Environmental resistance : Ambient humidity35 to 85 % RH , Storage: 35 to 85 % RH
    Environmental resistance : Vibration resistance10 to 55 Hz frequency (period: 1 min) , 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for 30 min. each
    Environmental resistance : Shock resistance196 m/s2 acceleration (20G approx.) in X, Y, and Z directions three times each
    MaterialEnclosure: Aluminum
    Weight300 g approx.
    AccessoryHL-D3 set-up CD-ROM, (including HL-D3SMI and User's Manual), Instruction manual, USB cable (2 m 6.562 ft)

    MENU

    Recently checked products

    Recently checked product numbers