Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-SC113｜Contact-Type Digital Displacement Sensor HG-S

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HG-SC113

Part Number

HG-SC113

Product

Contact-Type Digital Displacement Sensor

Details

Slave unit Wire-saving type

Product Name

 Contact-Type Digital Displacement Sensor HG-S

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHG-SC113
Product NumberHG-SC113
Product detailsSlave unit Wire-saving type
Products NameContact-Type Digital Displacement Sensor
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Pollution degree2
Operating altitude2000 m 6561.68 ft or less
Environmental resistance : ProtectionIP40 (IEC)
Environmental resistance : Ambient temperature-10 to +50 ℃ +14 to +122 ℉ (No condensation or icing), Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 to 58Hz), maximum acceleration 49 m/s2 (58 to 150 Hz) in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
MaterialCase: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
WeightNet weight:
60 g approx.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃ +68 ℉.
External inputs (Input 1, Input 2, Input 3):Trigger input-

Controller

ItemSpecifications
Compatible sensor headHG-S1010-AC,HG-S1110-AC,HG-S1010(R),HG-S1110(R),HG-S1032,HG-S1050
Number of connectable unitsUp to 15 slave units can be connected per master unit. (Note):When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
Analog current output-
Control outputs(Output 1, Output 2, Output 3)-
Control outputs(Output 1, Output 2, Output 3):Short-circuit protection-
Control outputs(Output 1, Output 2, Output 3):Judgment output-
Control outputs(Output 1, Output 2, Output 3):Alarm output-
External inputs (Input 1, Input 2, Input 3)-
External inputs (Input 1, Input 2, Input 3):Preset input-
External inputs (Input 1, Input 2, Input 3):Reset input-
External inputs (Input 1, Input 2, Input 3) Bank input A / B-
Response time3 ms, 5 ms, 10 ms, 100 ms, 500 ms, 1,000 ms switching type
Digital display204-segment LCD
Display resolution0.1μm 0.004 mil
Display range-199.9999 to 199.9999mm -7.874 to 7.874 in
Contamination level2
Elevation2,000 m 6561.68 ft or less (Note):Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance:Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Cable-
NotesWhere measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20℃ +68℉.

Controllers

ItemSpecifications
Supply voltage24 V DC ±10 %, including ripple 0.5 V (P-P)
Current consumption70 mA or less (when sensor head is connected)(Note):Current consumption does not include analog current output.

MENU

Recently checked products

Recently checked product numbers