MHMJ082G1U｜MINAS A5 Family Servo Motor (Discontinued)
Download
Discontinued
Last time buy (JST)
*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
| Part Number | MHMJ082G1U |
|---|---|
| Product | Servo Motor |
| Details | High inertia, Lead wire type, IP65 |
| Product Name | MINAS A5 Family Servo Motor (Discontinued) |
| Features | 10 W to 7.5 kW, Input power supply for Driver: Voltage DC 24 V/48 V・AC 100 V/200 V/400 V, 20 bit incremental・17 bit Absolute/Incremental encoder, Frequency response 2.3 kHz |
Spec Detail
| Item | Specifications |
|---|---|
| Part Number | MHMJ082G1U |
| Product details | High inertia, Lead wire type, IP65 |
| Family Name | MINAS A5 |
| Series | MHMJ Series |
| Type | High inertia |
| Special Order Product | Please avoid the motor, or equipment containing the motor to be distributed to Japan, or other regions through Japan. |
| Protection class | IP65 |
| About Enclosure | Except rotating portion of output shaft and leadwire end. |
| Environmental Conditions | For more details, please refer to the instruction manual. |
| Flange sq. dimension | 80 mm sq. |
| Flange size (mm) | 80 |
| Motor lead-out configuration | Lead wire |
| Motor encoder connector | Lead wire |
| Power supply capacity (kVA) | 1.3 |
| Voltage specifications (V) | 200 |
| Rated output (W) | 750 |
| Rated current (A rms) | 4.0 |
| Holding brake | without |
| Mass (kg) | 2.5 |
| Oil seal | with |
| Shaft | Key-way, center tap |
| Rated torque (N ⋅ m) | 2.4 |
| Momentary Max. peak torque (N ⋅ m) | 7.1 |
| Max. current (A 0-p) | 17.0 |
| Regenerative brake frequency (times/min) | Without option :No limit With option :No limit Option (External regenerative resistor) Part No. : DV0P4283 |
| About regenerative brake frequency | Please refer to the details of [Motor Specification Description] , Note: 1, and 2. |
| Rated rotational speed (r/min) | 3000 |
| Max. rotational speed (r/min) | 4500 |
| Inertia of rotor ( x10-4 kg ⋅ m²) | 1.51 |
| Recommended inertia ratio | 20 times or less |
| About recommended moment of inertia ratio of the load and the rotor | Please refer to the details of [Motor Specification Description] ,Note: 3. |
| Rotary encoder: specifications | 20-bit Incremental system |
| Rotary encoder: Resolution | 1048576 |
Permissible load
| Item | Specifications |
|---|---|
| During assembly: Radial load P-direction (N) | 686 |
| During assembly: Thrust load A-direction (N) | 294 |
| During assembly: Thrust load B-direction (N) | 392 |
| During operation: Radial load P-direction (N) | 392 |
| During operation: Thrust load A, B-direction (N) | 147 |
| About permissible load | For details, refer to the [Motor Specification Description] "Permissible Load at Output Shaft". |
Applicable Driver
| Part Number | Series | Type | I/F Classification of type | Frame | Supply voltage |
|---|---|---|---|---|---|
Ⅾiscontinued | A5 series | Speed, Position, Torque, Full-closed type | Analog/Pulse | C-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5E series | Position control type | Pulse train only | C-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡN series | RTEX, Ultra high-speed Network | RTEX | C-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡN series | RTEX, Ultra high-speed Network | RTEX | C-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5Ⅱ series | Speed, Position, Torque, Full-closed type | Analog/Pulse | C-Frame | Single/3-phase 200 V |
Ⅾiscontinued | A5ⅡE series | Position control type | Pulse train only | C-Frame | Single/3-phase 200 V |
Torque characteristics
Dotted line represents the torque at 10 % less supply voltage.
Dimensions
[Unit: mm]
* The external dimension is common between With or Without the brake.