Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

ANPV0504V2ADN｜PV500V2(Discontinued)

Download

Discontinued

Last time buy (JST)

No Image

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    ANPV0504V2ADN

    Part Number

    ANPV0504V2ADN

    Product

    PV500 IMAGECHECKER units

    Details

    [4-camera type] NPN output type

    Product Name

    		 PV500V2(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberANPV0504V2ADN
    Product NumberANPV0504V2ADN
    Products NamePV500 IMAGECHECKER units
    Product details[4-camera type] NPN output type
    The price of the productPlease contact our office

    General specifications

    ItemSpecifications
    Rated operating voltage24V DC
    Operating voltage range21.6 to 26.4 V DC (including ripples)
    Rated current consumption2.0 A max.
    Ambient temperature during use0 to +40degrees (no freezing or condensation)
    Storage ambient temperature-20 to +60degrees (no freezing or condensation)
    Ambient humidity during use35 to 85%RH (at 25degrees (no freezing or condensation)
    Storage ambient humidity35 to 85%RH (at 25degrees (no freezing or condensation)
    Noise immunity1,000 V, Pulse width: 50 ns, 1 micros (using the noise simulator method)
    Vibration resistance10 to 55 Hz, 1 sweep/min, double amplitude of 0.75 mm, 30 minutes each in the X, Y, and Z directions
    Shock resistance196 m/s2, 5 times each in the X, Y and Z directions
    Insulation resistance (initial value)100 MOhm or higher (measured by a 500 V DC megger) *
    Input and output terminals -- Power and ground terminals
    Input and output terminals -- Non-energized metal part
    Power terminal -- Non-energized metal part
    * The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
    Breakdown voltage (initial value)500 V AC for 1 min (600 V AC for 1 sec), Cutoff current: 10 mA *
    Input and output terminals -- Power and ground terminals
    Input and output terminals -- Non-energized metal part
    Power terminal -- Non-energized metal part
    * The evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the unit.
    Battery lifeApprox. 10 years (at 25degrees)
    WeightApprox. 1.6 kg (incl. terminal blocks and connectors)

    Functional specifications

    ItemSpecifications
    Input/output : CamerasQuad-speed 300,000-pixel camera (640x480) and
    2-megapixel camera (1600x1200)
    Up to four cameras can be attached.
    Input/output : Monitor outputXGA (1024x768) output
    Input/output : Memory cardSD memory card
    Input/output : SerialRS-232C x 1, Ether net x 1
    PLCs compatible with the RS232C PLC link function
    Panasonic Electric Works SUNX: FP Series
    Mitsubishi Electric: A, Q, FX (FX1N), and
    FX-2N series (FX2N, FX3U, and FX3UC)
    OMRON: C, CV, and CS1 series
    Allen-Bradley: SLC500
    Fuji Electric: MICREX-SX SPH series
    Input/output : USBUSB 2.0, A-B type
    Input/output : ParallelPhoenix terminals: 14 inputs / 15 outputs
    MIL terminals: 32 inputs / 32 outputs
    Input/output : Keypad input1 connector for dedicated keypad (ANPVP**)
    Menu displayEight languages (nine fonts) switchable
    Monitor displaySplit-screen display of up to four camera images
    Zoom function (2 to 400%)
    Image display: Through/Memory/NG object images
    Display effects: Gray Scale/Thresholding Group/Pre-processing Group
    Display area (1024 x 768). 16,770,000 colors
    Processing methodsGray scale processing, thresholding processing
    Number of connected camerasUp to four cameras(Select between the quad-speed 300,000-pixel camera and the 2-megapixel camera.)
    Camera connectionMini camera link connector for connection by camera link (PoCL)
    Trigger inputSelect from: All cameras, individual cameras, detection trigger (all)
    Capture methodFrame mode only. Partial capture of up to two portions
    In partial capture mode, the minimum capture area to be set for the quad-speed
    300,000-pixel camera is one line, and that for the 2-megapixel camera is 100 lines.
    Shutter speed30 micros to 1000 ms (Set in increments of 10 micros)
    Gain setting range0.25 to 1.0
    No. of product types25,600 types max. (depends on setting data)
    Inspection functions (Checkers)1,000 checkers/product type max. (depends on setting data)
    Position adjustment, Position/rotation adjustment, Rotation adjustment
    Area size adjustment, Binary window, Gray window, Binary edge
    Gray edge, Feature extraction, Smart matching, Line, Flaw detection
    Connector(binary window), Connector(gray window)
    Connector(gray edge), Smart edge (circles)
    Inspection operation modeSequential processing: Mode compatible with the conventional model. After completing the result output, the next image capture for inspection can be started.
    Parallel processing: After completing the first image capture, the image capture for the next inspection can be started immediately. Image capture and inspection can be processed concurrently.
    Slice level group26 levels/product type, 256-gray scale (0 to 255)
    Image preprocessPreprocessing filters: 21 types
    For each product type, 5 groups/camera, 10 stages max.
    (Dilation, Erosion, Erosion to Dilation, Dilation to Erosion, Auto correction, Gray cut,
    Area averaging, Correction settings, Median, Smoothing, Sobel, Prewitt, Laplacian,
    Edge extraction X, Edge extraction Y, Sharpen, Tophat, Dynamic, Frequency extraction,
    Rotation, and Reflect)
    Processing resolution2-megapixel camera: 1600 horizontal x 1200 vertical pixels
    Quad-speed 300,000-pixel camera: 640 horizontal x 480 vertical pixels
    Numerical calculation1,000 formulae/product type max., including those for evaluation result output (depends on setting data)
    Calculations involving output values of inspection functions
    Judgement output1,000 formula/product type max., including those for numerical calculation (depends on setting data)
    Substitution for and logical calculation of evaluation results from checkers and numerical computations
    Data R/WFour-window display of up to 80 (5x16) cells/product type on screen in table form in RUN mode
    Substitution of title input, checker conditions/results, numerical calculation results, numerical
    calculation judgement results, judgement results, statistical results possible.
    Change of upper/lower limits of numerical computation in the table in RUN mode possible.
    Conversion dataCoordinates, coordinate origin, horizontal and vertical coefficients can be set for each camera to obtain actual dimensions.
    Marker8 markers/product type max. for each camera Graphic display on the operation screen Selectable from eight colors
    Collective movingCollective movement of set checkers in units of position/rotation adjustment groups
    Set the movement to Yes/No. Position and rotation adjustment checkers cannot be moved.
    Template re-registration settingsSet position/Adjusted position
    Execution modeExecution of all checkers

    MENU

    Recently checked products

    Recently checked product numbers