Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LightPix AE10 (Discontinued Products)

Download

  • Discontinued Products

  • Specifications

  • Dimensions

Ⅾiscontinued

Last time buy (JST)

May 31, 2006

We are sorry, the products have been discontinued. 
Please refer to the details of the discontinued products and the recommended substitutes list below.

------------------------------ Tab1 showing ------------------------------

Discontinued Products

pic01

Recommended Substitutes

------------------------------ Tab2 showing ------------------------------

Specifications

General Specifications

ItemSpecifications
Rated operation voltage24V DC
Operating voltage range21.6 to 26.4 V DC (including ripples)
Rated current consumption0.5 A max.
Ambient temperature in use0 to +40℃
Storage ambient temperature-20 to +60℃ (no freezing or condensation)
Ambient humidity
(in use and storage)		35 to 75%RH (no freezing or condensation)
Insulation resistance100MΩ max. 500 V DC*
Breakdown voltage500 V AC/1 min (600V AC/1 min.)*
Noise immunity1000V (p-p), pulse width 50ns/1μs (using noise simulator method)
WeightMain unit: approx. 400g
Operation unit: approx. 200g
Finder unit: approx. 200g
Vibration resistance10 to 55Hz, 1 cycle/1 min. Double amplitude of 1.5mm, 30min. each X,Y and Z directions
Shock resistance196m/s2, 5 times each in X,Y and Z directions

*Evaluation was carried out with the primary side power supply varistor and capacitor removed from the internal circuit of the device.

Function Specifications

Main unit

ItemSpecifications
ModelANE101*ANE102*ANE103*ANE104*
Installation distance (mm)45±2.5105±5.550±5.0120±12.0
Measurement range (mm)10 x 825 x 2050 x 40100 x 80
Resolution (mm)0.10.20.5
Photo acceptance unitColor, C-MOS
Valid pixels352 Horizontal x 288 vertical pixels (100,000 pixels)
Image capture light sourceWhite LED
Exposure timeShutter timing and interlock
Input and OutputSerialRS-485 port
 Transmission speed9,600/14,400/19,200/38,400/57,600 bps
Transmission directionHalf duplex
Synchronization systemAsynchronous
Transmission codeASCII
Data length8 bits
Parity checkNone
Stop bit length1 bit
BCCAvailable
DelimiterCR (0DH)
Flow controlNo
ParallelMini D-Sub, 15 pins (shared power supply)
 InputPhoto coupler input, 6 points
Trigger: 1 bit; mode switch: 2 bits;
type switch: 3 bits
OutputPhotoMOS output, 5 points
Ready: 1 bit; Alarm: 1 bit;
decision output: 3 bits
Dedicated device portConnection port for operation unit

Operation unit

ItemSpecifications
Display7 segment, 3 colors
No. of switches8
Dedicated device portConnection port for main unit
Content of input- Type switching (type 1 to 7)
- Mode switching (teaching/Run/Run-view)
- Trigger Input
- Permissible zone
- Device setting
(Transmission speed/device No./output delay/load delay/trigger switching/start-up type/function switching/backlight off time/auto saving/initialization/lamp on/off switching)
Display content- Judgement result
- Calculation result
- READY
- Alarm

Finder unit

ItemSpecifications
Display2-inch color LCD
backlightWhite LED
Backlight life40,000h (at 25℃)
OperationAvailable only with the operation unit

Application

ANE***0

ItemSpecifications
Part numberANE***0
Function nameColor extraction
Color resolution12 colors
(Use the Gretag Macbeth Color Rendition Chart for confirmation.)
Function(1) Colored area
(Detected area of registered color on object.)
(2) Color discrimination
(Distinguishes which color is closest to registered color.)
[These two modes switched in device setting mode. Simultaneous use is not possible.]
No. of registered items7 types
Color registration methodTeaching
Input valueUpper and lower limit values for area judgement
SerialInput- Trigger input
- Type switching (types 1 to 7)
- Function switching
- Upper/lower limit values
- Save
Output- Judgement result
- Computation result (numerical)
- Error output
ParallelInput- Trigger input
- Type switching (Types 1 to 7)
- Mode switching (Teaching/Run/Run-view)
Output- Judgement result (OK/NG)
- READY
- Alarm

ANE***1

ItemSpecifications
Part numberANE***1
Function nameEdge detection
Function(1) Edge detection
(2) Apex detection
[These two modes switched in device setting mode. Simultaneous use is not possible.]
No. of registered items7 types
Object registration methodTeaching
Input valuePemissible zone to determine edge position or apex coordinates.
SerialInput- Trigger input
- Type switching (types 1 to 7)
- Function switching
- Permissible values
- Save
Output- Decision result
- Computation result (numerical)
- Error output
ParallelInput- Trigger input
- Type switching (Types 1 to 7)
- Mode switching (Teaching/Run/Run-view)
Output- Judgement result (OK/NG)
- READY
- Alarm

ANE***2

ItemSpecifications
Part numberANE***2
Function nameWidth measurement
Function(1) Discriminates and judges max. and min.
vertical width, and max. and min. horizontal width.
No. of registered items7 types
Object registration methodTeaching
Input valuePemissible zone to determine max. and min. width.
SerialInput- Trigger input
- Type switching (types 1 to 7)
- Function switching
- Permissible values
- Save
Output- Decision result
- Computation result (numerical)
- Error output
ParallelInput- Trigger input
- Type switching (Types 1 to 7)
- Mode switching (Teaching/Run/Run-view)
Output- Decision result (OK/NG)
- READY
- Alarm

------------------------------ Tab3 showing ------------------------------

Dimensions

Unit: mm in

Main unit

Part No.L(mm)Vision field (Xmm x Ymm)
ANE10104510 x 8
ANE1011
ANE1012
ANE102010525 x 20
ANE1021
ANE1022
ANE10305050 x 40
ANE1031
ANE1032
ANE1040120100 x 80
ANE1041
ANE1042


Finder unit

Operation unit

MENU

Recently checked products

Recently checked product numbers