Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

ER-F12｜Fan Type Ionizer ER-F

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    ER-F12

    Part Number

    ER-F12

    Product

    Fan Type Ionizer

    Details

    Standard fan type

    Product Name

    		 Fan Type Ionizer ER-F
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberER-F12
    Product NumberER-F12
    Products NameFan Type Ionizer
    Product detailsStandard fan type
    The price of the productPlease contact our office
    Charge removal time1 sec. approx. (plus or minus1,000 V to plus or minus100 V)
    (Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
    Ion balanceplus or minus10 V or less
    (Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
    Supply voltage24 V DC plus or minus10%
    Current consumption700 mA or less
    Discharge methodHigh-frequency AC method
    Discharge output voltageplus or minus 2 kV approx.
    Max. fan speed5.3 m/s
    (Note) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
    Max. fan volume3.68 m3/min
    Main functionsError output, Discharge halt input
    IndicatorsDischarge error (Red), Fan error (Red), Power (Green), Discharge (Green)
    Ozone generation0.04 ppm or less
    (Note) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed.
    Ambient temperature0 to +50degrees +32 to +122degrees Fahrenheit (No dew condensation) , Storage: –10 to +65degrees +14 to +149degrees Fahrenheit
    Ambient humidity35 to 65% RH (No dew condensation) , Storage: 35 to 65% RH
    Grounding methodC (capacitor) grounding
    MaterialEnclosure: ABS, Louver: ABS, Discharge needle unit: PBT, Discharge needle: Tungsten, Bracket: SPHC
    WeightMain unit: 790 g approx.
    AccessoriesStraight louver: 1 pc. (Note), Angle louver: 1 pc., Caution label: 1 set, Rubber cushion: 1 pc.
    (Note) The discharge needle unit is loaded on the straight louver before shipment.

    MENU

    Recently checked products

    Recently checked product numbers