Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SQ4-C11｜Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] SQ4

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SQ4-C11

Part Number

SQ4-C11

Product

Safety Liquid Leak Sensor [Control Category 4 PLe SIL3]

Details

Controller

Product Name

 Safety Liquid Leak Sensor [Control Category 4 PLe SIL3] SQ4

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSQ4-C11
Product NumberSQ4-C11
Products NameSafety Liquid Leak Sensor [Control Category 4 PLe SIL3]
Product detailsController
The price of the productPlease contact our office
Applicable standards:International standardISO 13849-1 (Category 4, PLe), IEC 61508-1 to 7 (SIL3)
Applicable standards:JapanJIS B 9705-1 (Category 4), JIS C 0508-1 to 7 (SIL3)
Applicable standards:EuropeEN 55011 Class A, EN 61000-6-2, EN 50178, EN ISO 13849-1 (Category 4, PLe), EN 61508-1 to 7 (SIL3)
(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate.
Applicable standards:North AmericaANSI/UL 508, CAN/CSA C22.2 No.14
(Note) With regards to the standards in the US, under the US regulation 29 CFR 1910.7, TÜV SÜD America, a Nationally Recognized Testing Laboratory (NRTL) certified by OSHA, has certified with the safety certificate based on UL / ANSI standards.
With regards to the standards in Canada, under the safety regulations based on CEC (Canadian Electric Code), TÜV SÜD America, a Certification Body accredited by SCC, has certified with the safety certificate based on CSA standards.
Applicable standards:South KoreaS1-G-1, S2-W-5, KS C IEC 60947-5-2
Applicable standards:SEMIConforming to SEMI-S2-0310a
Power voltage24 V DC+10-15 % Ripple P-P 10 % or less
Current consumption200 mA or less
Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor / NPN open-collector transistor (switch method)
[Selecting PNP output]
- Maximum source current: 200 mA
- Applied voltage: Same as power voltage (between control output to +V)
- Residual voltage: 2.5 V or less (at 200 mA source current)
[Selecting NPN output]
- Maximum sink current: 200 mA
- Applied voltage: Same as power voltage (between control output to 0 V)
- Residual voltage: 2.0 V or less (at 200 mA sink current)
Control output(OSSD 1, OSSD 2):Response time20 ms or less (excluding the response time of the sensor)
Control outputs (OSSD 1, OSSD 2):Operation modeON when normal condition or initial detection, OFF when detection leakage or wrong installation
Control output(OSSD 1, OSSD 2):Protection circuit (Short-circuit protection)Incorporated
Sensor monitor output(AUX1, 2, 3, 4, Non-safety output)PNP open-collector transistor / NPN open-collector transistor (switch method)
[Selecting PNP output]
- Maximum source current: 60 mA
- Applied voltage: Same as power voltage(between sensor monitor output to +V)
- Residual voltage: 2.5 V or less (at 60 mA source current)
[Selecting NPN output]
- Maximum sink current: 60 m A
- Applied voltage: Same as power voltage(between sensor monitor output to 0 V)
- Residual voltage: 2.0 V or less (at 60 mA sink current)
Sensor monitor output(AUX1, 2, 3, 4, Non-safety output):Response time100 ms or less (excluding the response time of the sensor)
Sensor monitor output(AUX1, 2, 3, 4, Non-safety output):Operation mode(Output operation)ON when normal condition, OFF when initial detection or accidental leakage
Sensor monitor output(AUX1, 2, 3, 4, Non-safety output):Protection circuit (Short-circuit protection)Incorporated
Lockout outputOFF for lockout (Rating: Same as sensor monitor output)
Auxiliary outputNegative logic output of control output 1 / 2 (OSSD 1 / 2) (Rating: Same as sensor monitor output)
[Auxiliary output ON when control output 1 / 2 (OSSD 1/2) is OFF]
FunctionsInterlock / lockout cancel / Test input / External device monitor / Safety input / Control output polarity selection / Non-safety output polarity selection / Sensor connection number setting
ProtectionIP20 (IEC) (However, it should be in IP54 protection structure of control panel)
Ambient temperature-10 to +55 ℃ +14 to +131℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
PFHDWhen PNP output is selected: 1.89 × 10-9 (when connecting 4 safety liquid leak sensors)
When NPN output is selected: 1.80 × 10-9 (when connecting 4 safety liquid leak sensors)
MTTFD100 years or more
MaterialMain unit case: PC + ABS (alloy)
WeightNet weight: 170 g approx
Gross weight: 440 g approx

MENU

Recently checked products

Recently checked product numbers