Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SG-C1-21｜Enable grip switch SG-C1

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SG-C1-21

Part Number

SG-C1-21

Product

Enable grip switch

Product Name

 Enable grip switch SG-C1

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSG-C1-21
Product NumberSG-C1-21
Products NameEnable grip switch
Contact configuration : 3 position enabling switch2
contacts
Contact configuration : Push monitor switchWith
(1NC)
Contact configuration : Additional control units : Emergency stop switchWithout
Contact configuration : Additional control units : Control unit (A)Without
Contact configuration : Additional control units : Control unit (B)Without
Contact configuration : Additional control units : Indicator (green) (C)Without
Rubber boot material / ColorSilicone rubber /
(Yellow)
(Note): Silicone rubber: Can be used in general factories. Remains flexible in cold temperatures. Suitable in applications with a wide operating temperature range.
Wiring styleSolder terminal
Applicable standardsEN 60947-5-1, EN IEC 60947-5-8, GS-ET-22
Applicable standards : Standards for useISO 12100 / EN ISO 12100, IEC 60204-1 / EN 60204-1, ISO 11161 / EN ISO 11161, ISO 10218-1 / EN ISO 10218-1, ANSI / RIA / ISO 10218-1, ANSI / RIA R15.06, ANSI B11.19, ISO 13849-1: 2015 / EN ISO 13849-1: 2015, JIS C 8201-5-1, UL 508, CSA C22.2 No.14
Applicable regulations and certificationsCE Marking[Machinery Directive(2006/42/EC), RoHS Directive], UKCA Marking[Machinery Regulations(2008 No.1597), RoHS Regulations], UL/c-UL Recognition Certification, TÜV SÜD certification
Operating condition : Ambient temperature-25 to +60 ℃ -13 to +140 ℉ (No dew condensation or icing allowed)
Storage : -40 to +80 ℃ -40 to +176 ℉
Operating condition : Ambient humidity45 to 85 % RH
Operating condition : Pollution degree3 (Inside 2)
Operating condition : Altitude2,000 m 6,561.68 ft max.
Impulse withstand voltage (Uimp)2.5 kV (Momentary pushbutton switch and key selector switch : 1.5 kV)
Rated insulation voltage (Ui)250 V (Momentary pushbutton switch and key selector switch : 125 V) /
Models with indicator : 30 V
Thermal current (Ith)3 A (Emergency stop switch : 5 A)
Rated operational voltage (Ue) / Rated operational current (Ie)
  Ue
  30V 125V 250V
Ie Grip switch 3 position enabling switch
(Terminal No.: NO1-C1, NO2-C2) 		AC Resistive load (AC-12) - 1A 0.5A
Inductive load (ACー15) - 0.7A 0.5A
DC Resistive load (DC-12) 1A 0.2A -
Inductive load (DC-13) 0.7A 0.1A -
Push monitor switch
(Terminal No. 31-32)		 AC Resistive load (AC-12) - 2.5A 1.5A
Inductive load (ACー15) - 1.5A 0.75A
DC Resistive load (DC-12) 2.5A 1.1A 0.55A
Inductive load (DC-13) 2.3A 0.55A 0.27A
Emergency stop switch
(Terminal No. 1-2, 1-2)		 AC Resistive load (AC-12) - 5A 3A
Inductive load (ACー15) - 3A 1.5A
DC Resistive load (DC-12) 2A 0.4A 0.2A
Inductive load (DC-13) 1A 0.22A 0.1A
Momentary pushbutton switch
/ Key selector switch
(Terminal No.C1-NO1, NC1
C2-NO2, NC2 )		 AC Resistive load (AC-12) - 0.5A -
Inductive load (ACー15) - 0.3A -
DC Resistive load (DC-12) 1A 0.2A -
Inductive load (DC-13) 0.7A 0.1A -
Electric shock protection classClass II (IEC 61140), 回(double insulated)
(Models with indicator : Class III)
Operating frequency1,200 operations/hour
B10D2,000,000
(EN ISO 13849-1:2015 Annex C Table C.1)
Mechanical durabilityPosition 1→2→1 : 1,000,000 operations min.
Position 1→2→3→1 : 100,000 operations min.
Electrical durability100,000 operations min. (Rated operating load)
1,000,000 operations min. (AC / DC 24 V 100 mA)
Shock resistanceMalfunction : 150 m/s2, Destruction : 1,000 m/s2
Free fall1.0 m 3.281 ft 1 time (Based on IEC60068-2-32)
Vibration resistanceMalfunction : 5 to 55 Hz, half amplitude 0.5 mm 0.020 in
Destruction : 16.7 Hz, half amplitude 1.5 mm 0.059 in
ProtectionIP66/IP67
Conditional short-circuit current50 A (250 V)
Short-circuit protective device250 V AC, 10 A Fuse (IEC60127-1)
Direct opening force60 N min. (Push monitor switch)
Direct opening travel4.7 mm 0.185 in min. (Push monitor switch)
Actuator Strength (Entire button is pushed) 500 N min. (Grip switch)
IndicatorGreen LED
Rated Operating Voltage : DC 24 V ±10 %
Rated current : 15 mA
(Note): As for the type with pilot light, Ue (contact ratings) of all switches is only less than 30 V DC, and connect all switches to SELV (safety extra low voltage) or PELV (protective extra low voltage) circuit.
WeightApprox. 140 g

MENU

Recently checked products

Recently checked product numbers