Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SD3-A1｜Safety Laser Scanner Type 3 SD3-A1(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    SD3-A1

    Part Number

    SD3-A1

    Product

    Safety Laser Scanner Type 3

    Product Name

    		 Safety Laser Scanner Type 3 SD3-A1(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberSD3-A1
    Product NumberSD3-A1
    Products NameSafety Laser Scanner Type 3
    The price of the productPlease contact our office
    Applicable standards:International standardIEC 61496-1/3 (Type 3), ISO 13849-1 (Category 3, PLd), IEC 61508-1 to 7 (SIL2), IEC 62061 (SIL2)
    Applicable standards:JapanJIS B 9704-1/3 (Type 3), JIS B 9705-1 (Category 3), JIS C 0508 (SIL2)
    Applicable standards:EuropeEN 61496-1 (Type 3), ISO 13849-1 (Category 3, PLd), EN 61508-1 to 7 (SIL2)
    dummydia. 150 mm dia. 5.906 in/0 to 4.0 m 0 to 13.123 ft
    dia. 70 mm dia. 2.756 in/0 to 4.0 m 0 to 13.123 ft
    dia. 50 mm dia. 1.969 in/0 to 2.8 m 0 to 9.186 ft
    dia. 40 mm dia. 1.575 in/0 to 2.2 m 0 to 7.218 ft
    dia. 30 mm dia. 1.181 in/0 to 1.6 m 0 to 5.249 ft
    dummyWhen dust suppression function is not selected: 83 mm 3.268 in
    When dust suppression function is selected: 83 mm 3.268 in for less than 3.5 mm 0.138 in, and 100 mm 3.937 in for 3.5 mm 0.138 in or more
    (automatically calculated using the included software)
    dummyMinimum 1.8 %
    dummydia. 150 mm dia. 5.906 in (fixed)
    dummy0 to 15 m 0 to 49.213 ft
    dummyMinimum 20 %
    dummy50 m 164.042 ft (fixed)
    dummy190degrees / 180degrees (by setting)
    dummyMax. 7 + 1 (without detection zone)
    [Zone pairs in combination of detection zone and warning zone can be switched over by external input]
    dummy200mm 7.874 in
    dummy24 V DC+20-30 % (IEC 60742)
    Current consumption300mA approx. (excluding external connection load)
    Fuse rating1.25 A semi-time-lag fuse
    Control outputs (OSSD 1, OSSD 2)PNP open-collector transistor 2 outputs
    - Rated operating voltage: supply voltage (UB) - 3.2 V
    - Max. source current: 250 mA
    - Residual voltage: 3.2 V or less
    Control outputs (OSSD 1, OSSD 2):Operation modeWhen no object enters into the detection zone: ON
    When an object enters: OFF
    Control output(OSSD 1, OSSD 2):Response timeMin. 80 ms (2 scans) to max. 640 ms (16 scans) switching method
    Control outputs (OSSD 1, OSSD 2):Protection circuitIncorporated
    dummyPNP open-collector transistor
    - Rated operating voltage: supply voltage (UB) - 4 V
    - Max. source current: 100 mA
    - Residual voltage: 4 V or less
    dummySwitching method of operation mode (set by below)
    - Not used
    - Main unit at normal operation: ON, Abnormal operation: OFF
    - When no object enters into the warning zone: ON, When an object enters: OFF
    - Main unit at normal operation: ON, Abnormal operation: OFF and When no object enters into the warning zone: ON, When an object enters: OFF
    dummyMin. 80 ms (2 scans) to max. 640 ms (16 scans) switching method
    dummyPNP open-collector transistor
    - Rated operating voltage: supply voltage (UB) - 4 V
    - Max. source current: 100 mA
    - Residual voltage: 4 V or less
    dummyMain unit at normal operation: ON
    Abnormal operation: OFF
    dummyClass 1 [IEC 60825, FDA (Note) ]
    (Note) In accordance Laser Warning 50 (2007.6.24), based on FDA regulations (21 CFR 1040.10, 1040.11).
    dummy905 nm 0.036 mil
    Environmental resistance:Degree of protectionIP65
    Environmental resistance:Ambient temperature0 to +50degrees +32 to +122 degrees Fahrenheit , Storage: -20 to +60degrees -4 to +140 degrees Fahrenheit
    Environmental resistance:Ambient humidityOperation and storage: Max. 95 % RH (No dew condensation)
    dummy10 to 150 Hz frequency, 5 G max. (50 m/s2 approx.) in X, Y and Z directions for twenty times each
    Maximum cable length15-pin plug: Max. 50 m 164.042 ft
    9-pin plug: Max. 10 m 32.808 ft (when using RS-232C) / Max. 50 m 164.042 ft (when using RS-422)
    (by using optional connection cable) (Note)
    (Note) Be careful that a voltage drop may occur depending on the cable length or cable's conductor cross-section area.
    MaterialMain body: Die-cast aluminum
    Scanner window: Thermoplastic resin
    AccessoriesSD3-PS (exclusive 15-pin connector): 1 pc
    SD3-RS232 (exclusive 9-pin connector): 1 pc
    Mounting screws [M5 (length 20 mm 0.787 in) hexagon-socket-head bolt: 2 pcs M5 (length 16 mm 0.630 in) hexagon-socket-head bolt: 2 pcs., attached to SD3-PS]: 1 set
    Simplified instruction manual: 1 copy
    Installation CD-ROM (includes detailed instruction manual data): 1 CD
    WeightNet weight: 2.1 kg approx
    Gross weight: 2.9 kg approx

    MENU

    Recently checked products

    Recently checked product numbers