Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-F13A-A-P｜Compact & Long Range Laser Distance Sensor HG-F1

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    HG-F13A-A-P

    Part Number

    HG-F13A-A-P

    Product

    Laser Distance Sensor

    Details

    PNP output type

    Product Name

    		 Compact & Long Range Laser Distance Sensor HG-F1

    Contact Us

    *Specifications and design of the products are subject to change without notice for the product improvement.

    Spec Detail

    Specifications and design of the products are subject to change without notice for the product improvement.
    ItemSpecifications
    Part NumberHG-F13A-A-P
    Product NumberHG-F13A-A-P
    Products NameLaser Distance Sensor
    Product detailsPNP output type
    Measurable range250 to 3,000 mm 9.843 in to 118.110 in
    Displayable range200 to 3,300 mm 7.874 in to 129.921 in
    (Note 2):When an object is detected, the range of numerical values that appear on the digital display is regarded as the displayable distance. When zero setting is performed, the displayable distance varies depending on the zero setting distance.
    Repeatability10 mm 0.394 in or less (target object: sheet of white non-glossy paper measuring 200 × 200 mm 7.874 × 7.874 in)
    Hysteresis30 mm 1.181 in (default setting) Possible to vary up to 1 mm 0.039 in minimum in the PRO mode (Note 3)
    (Note3):Changing the hysteresis may result in unstable sensing. After making a change, perform operation check using actual equipment.
    Linearity± 2% F.S. (Note 4) (at a measuring distance of 500 mm to 3,000 mm 19.685 in to 118.110 in)
    (Note 4):F.S. (full scale) represents a range from 0 mm to 3,000 mm 0 in to 118.110 in.
    Temprerature characteristics0.1% F.S./℃
    Light sourceRed semiconductor laser: Class 1 [IEC / EN / JIS / GB / KS / FDA(Note)]
    Maximum output: 0.39 mW, Peak emission wavelength: 680 nm 0.0268 mil
    (Note) : This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.
    Beam diameterApprox. ø10 mm ø0.394 in (typical) (at the measuring distance of 1,000 mm 39.370 in)
    (Note 5):The beam diameter is defined as 1/e2 (approx. 13.5%) of the center light intensity. Due to leak light outside the defined range, the measurement values may be affected if the reflectance around the detecting point is higher than that of the detecting point.
    Supply voltage24 V DC ±10%, including 10% ripple (P-P)
    Current consumption40 mA or less (at 24 V DC supply voltage)
    (Note 6):Analog output is not included.
    Control outputPNP open-collector transistor
    • Maximum source current: 50 mA
    • Applied voltage: 30 V DC or less (Between control output to +V)
    • Residual voltage: 1.5 V or less (At 50 mA source current)
    • Leakage current: 0.1 mA or less
    Control output:Output operationSwitchable between Light-ON / Dark-ON, (Default: Light-ON)
    Control output:Short-circuit protectionIncorporated (Auto reset type)
    Analog outputSwitchable between voltage output / current output (Default: voltage output)
    Analog output:Analog voltage output:Output range• In normal operation: 0 to +5 V Possible to set the distance range (Default: 250 to 3,000 mm 9.843 in to 118.110 in)
    • When alarm occurs: Last value is held or the range is set to 0 V on the near point side and to +5.2 V on the far point side.
    (Note) : When the intensity of received light is unstable, the voltage is output as 0 V and the current is output as 0 mA.
    Analog output:Analog voltage output:Output impedance100 Ω
    Analog output:Analog current output:Output range• In normal operation: +4 mA to +20 mA Possible to set the distance range (Default: 250 to 3,000 mm 9.843 in to 118.110 in)
    • When alarm occurs: Last value is held or the range is set to 0 mA on the near point side and to +20.8 mA on the far point side.
    (Note) : When the intensity of received light is unstable, the voltage is output as 0 V and the current is output as 0 mA.
    Analog output:Analog current output:Output impedance250 Ω or less
    Response timeSwitchable between 35 ms / 100 ms / 300 ms / 2,000 ms (Default: 100 ms)
    External inputPNP non-contact input
    • Input condition
    Invalid: 0 to +0.6 V DC or Open
    Valid: +4 to +V DC
    • Input impedance: approx. 10 kΩ
    External input functionSwitchable between zero set, teaching, or emission stop (Default: zero set)
    Teaching functionSwitchable between normal sensing mode (2-point / limit) or window comparator mode (1-point / 2-point / 3-point)
    (Default: Normal sensing mode)
    Timer functionSwitchable between OFF / ON delay / OFF delay / one-shot (Default: OFF)
    Timer periodSwitchable between 5 ms / 10 ms / 25 ms / 50 ms / 100 ms / 250 ms / 500 ms / 1,000 ms / 5,000 ms (Default: 5 ms)
    Pollution degree2
    Overvoltage categoryCategory I
    Operating altitude2,000 m 6561.680 ft or less
    (Note 7):Do not use or store this product in environments where ambient air is pressurized to an air pressure higher than the atmospheric pressure at an altitude of 0 m.
    ProtectionIP67 (IEC)
    Ambient temperature-10 to +45 ℃ +14 to 113 ℉ (No dew condensation or icing allowed), Storage: -20 to +60 ℃ -4 to 140 ℉
    Ambient humidity35 to 85% RH, Storage: 35 to 85% RH
    Ambient illuminanceIncandescent light: 3,000 ℓx or less at the light-receiving face
    Vibration resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
    Shock resistance500 m/s2 acceleration (approx. 50 G) in X, Y and Z directions three times each
    Cable0.2 mm2 5-core composite cable, 2 m 6.562 ft long
    Cable extensionExtension up to total 10 m 32.808 ft is possible with 0.3 mm2, or more, cable
    MaterialEnclosure: Aluminum die-cast, Front cover: Acrylic, Cable: PVC
    WeightNet weight: approx. 85 g, Gross weight: approx. 130 g

    Regulations and Standards

    ItemSpecifications
    Conforming directives and conforming regulations:EU RegulationsEMC Directive 2014/30/EU
    Conforming directives and conforming regulations:UK RegulationsEMC Regulations 2016/1091
    Applicable standardsEN 61000-6-4
    EN 61000-6-2
    EN 60825-1
    USA regulations: FDA21 CFR1040.10, and 1040.11 (Laser Notice No.56 applied)
    Conforming standards:USA/Canada StandardsUL 61010-1
    CAN/CSA No.61010-1
    Conforming standards:Other standardsIEC 60825-1
    JIS C 6802
    GB 7247.1
    KS C IEC 60825-1

    MENU

    Recently checked products

    Recently checked product numbers