Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-F62-PN｜Leak Detection Sensor EX-F70/EX-F60

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EX-F62-PN

Part Number

EX-F62-PN

Product

Leak Detection Sensor

Details

Chemical-resistant

Product Name

 Leak Detection Sensor EX-F70/EX-F60

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEX-F62-PN
Product NumberEX-F62-PN
Products NameLeak Detection Sensor
Product detailsChemical-resistant
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition
Sensing objectWater, Agent, such as Sulfuric acid, Hydrochloric acid, Phosphoric acid or Ammonia etc.
Note : Highly viscous liquid may not be detected stably.
Note : The agents mentioned above are examples. For details, please contact our office.
Note : PVC mounting bracket may not be used depending on type or viscosity etc. of the agent. For details, please contact our office.
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption15 mA or less
OutputPNP open-collector transistor
- Maximum source current: 50 mA
- Applied voltage: 30 V DC or less (between output and +V)
- Residual voltage: 1.0 V or less (at 50 mA source current), 0.4 V or less (at 16 mA source current)
Output:Output operationIn normal state: ON, When leak detected or the sensor is mounted improperly: OFF
Output:Short-circuit protectionIncorporated
Response time50 ms or less
FAULT indicatorRed LED (lights up when the leak liquid is detected, or the sensor is mounted improperly)
NORMAL indicatorGreen LED (lights up when the sensor is mounted properly)
ProtectionIP67 (IEC)
Ambient temperature-10 to +60 ℃ +14 to +140 ℉ (No dew condensation or icing allowed), Storage: -20 to +70 ℃ - 4 to +158 ℉
Note : Liquid being detected should also be kept within the rated ambient temperature range.
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 1,000 ℓx or less at the light-receiving face
Emitting elementInfrared LED (non-modulated)
MaterialEnclosure: PFA
Cable extensionExtension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.
WeightNet weight: 60 g approx.
AccessoryMS-EX-F6-2(PVC mounting bracket): 1 pc.

MENU

Recently checked products

Recently checked product numbers