Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

EX-11SA｜Ultra-slim Photoelectric Sensor EX-10 Ver.2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

EX-11SA

Part Number

EX-11SA

Product

Ultra-slim Photoelectric Sensor

Details

Thru-beam･Narrow Beam [Front sensing]

Product Name

 Ultra-slim Photoelectric Sensor EX-10 Ver.2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberEX-11SA
Product NumberEX-11SA
Products NameUltra-slim Photoelectric Sensor
Product detailsThru-beam･Narrow Beam [Front sensing]
The price of the productPlease contact our office
Applicable regulations・EMC Directive ： EN 60947-5-2
・RoHS Directive
・ISO 13849-1 (Category 1, PLc) (Note)
(Note) : Conformed from December 2021 production.
CertificationUL certification
Sensing range150 mm 5.906 in
Min. sensing objectdia. 0.5 mm dia. 0.020 in opaque object (Completely beam interrupted object)
(Note) : The min. sensing objects are specified in case the emitter / reciever sensing range is to set the maximum.
Hysteresis-
Repeatability(perpendicular to sensing axis)0.05 mm 0.002 in or less
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumptionEmitter: 10 mA or less
Receiver: 10 mA or less
OutputNPN open-collector transistor
- Maximum sink current: 50 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current)
Output:Utilization categoryDC-12 or DC-13
Output:Short-circuit protectionIncorporated
Response time0.5 ms or less
Operation indicatorOrange LED (lights up when the output is ON)
Incident beam indicator-
Stability indicatorGreen LED (lights up under stable light received condition or stable dark condition)
Pollution degree3 (Industrial environment)
ProtectionIP67 (IEC)
Ambient temperature-25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in amplitude (20 G max.) in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each
Emitting elementRed LED (Peak emission wavelength: 680 nm 0.027 mil, modulated)
MaterialEnclosure: Polyarylate
Lens: Polyarylate
Cable0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long
Cable extensionExtension up to total 50 m 164 ft is possible with 0.3 mm2, or more, cable (emitter and receiver).
(Note) : For safety applications, do not exceed 30 m 98.425 ft.
WeightNet weight (each emitter and receiver): 20 g approx
Gross weight: 50 g approx
AccessoryMounting screws: 1 set

MENU

Recently checked products

Recently checked product numbers