Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

PM2-LF10B｜Convergent Reflective Micro Photoelectric Sensor PM2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

PM2-LF10B

Part Number

PM2-LF10B

Product

Convergent Reflective Micro Photoelectric Sensor PM2

Details

Connector type Front sensing

Product Name

 Convergent Reflective Micro Photoelectric Sensor PM2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberPM2-LF10B
Product NumberPM2-LF10B
Products NameConvergent Reflective Micro Photoelectric Sensor PM2
Product detailsConnector type Front sensing
The price of the productPlease contact our office
Sensing range2.5 to 8 mm 0.098 to 0.315 in (Conv. point: 5 mm 0.197 in) with white non-glossy paper (15 × 15 mm 0.591 in × 0.591 in)
(Note)The sensing range may extend up to 12.5 mm 0.492 in with white non-glossy paper due to product variation.
Minimum sensing objectø0.05 mm ø0.002 in copper wire (Setting distance: 5 mm 0.197 in)
Hysteresis20 % or less of operation distance with white non-glossy paper
(15 × 15 mm 0.591 × 0.591 in)
Repeatability(perpendicular to sensing axis)0.08 mm 0.003 in or less
(Note) The repeatability is specified for white non-glossy paper (15 × 15 mm 0.591 × 0.591 in) at a setting distance of 5 mm 0.197 in.
Supply voltage5 to 24 V DC plus or minus 10 % Ripple P-P 5 % or less
Current consumptionAverage: 25 mA or less, Peak: 80 mA or less
OutputNPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between output and 0 V)
Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Output:Overcurrent protectionIncorporated
Output:Utilization categoryDC-12 or DC-13
Response time0.8 ms or less
Operation indicatorRed LED (lights up when the output is ON)
Pollution degree3 (Industrial environment)
Ambient temperature–10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: –25 to +80 ℃ –13 to +176 ℉
Ambient humidity45 to 85 % RH, Storage: 45 to 85 % RH
Ambient illuminanceIncandescent light: 3,500 lx or less at the light-receiving face
Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 880 nm 0.035 mil, modulated)
MaterialEnclosure: Polycarbonate, Terminal part: HSM (Ag plated)
Cable-
Cable lengthTotal length up to 2 m 6.562 ft is possible with 0.3 mm2, or more, cable.
(If the cable is extended for 2 m 6.562 ft, or more, a capacitor of 10 µF must be connected between +V and 0 V terminals.)
WeightNet weight: 4.5 g approx.
Gross weight: 85 g approx.(10 piece package)

MENU

Recently checked products

Recently checked product numbers