Basic Information
Heat-resistant U-shaped Fiber FT-PK40H1
Micro photoelectric sensor type fiber head capable of withstanding high-temperature environments!
Applications
Detection of open / closed status of cleaning fluid supply valve
The fiber head section contains no electric parts, thus allowing installation in a situation where high throughput is required but a conventional micro photoelectric sensor cannot be used, such as an environment dried with IPA (isopropyl alcohol) vapor.
Detection of dog during lifting / lowering of port (in high-temperature environment)
The FT-PK40H1 withstands heat of +100 °C +212 °F so it can be used in high-temperature environments such as thermal diffusion furnaces.
Related Products
[Suitable for use in normal environment] Micro Photoelectric Sensor PM series
Sensors come in various shapes to suit a wide range of mounting conditions
Three protection circuits standard on all models
All models are standardly equipped with the following protection circuits in their compact bodies. These protection circuits minimize the possibility of sensor malfunctions caused by erroneous wiring.
1) Reverse supply polarity protection circuit
2) Reverse output polarity protection circuit
3) Output short-circuit protection circuit
Order guide
| Type | Shape of fiber head (mm) | Model No. | Bending radius (mm) | Fiber cable length | Free-cut | Beam axis dia. (mm) | Protection | Ambient temp. |
|---|---|---|---|---|---|---|---|---|
| Heat-resistant U-shaped type |  | FT-PK40H1 | R10 | 5 m | Available (Note) | 0.7 x 0.8 | IP40 | -10～ +100℃ |
Note: Note that the sensing range of the free-cut type fiber may be reduced by 20 % max. depending upon how the fiber is cut.
Dimensions
- Unit: mm in
FT-PK40H1
