Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

FX-CH2-P｜External Input Unit for Digital Sensor FX-CH2

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

FX-CH2-P

Part Number

FX-CH2-P

Product

External Input Unit for Digital Sensor

Details

PNP input

Product Name

 External Input Unit for Digital Sensor FX-CH2

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberFX-CH2-P
Product NumberFX-CH2-P
Products NameExternal Input Unit for Digital Sensor
Product detailsPNP input
The price of the productPlease contact our office
Applicable sensorsFX-301(P) (Note) , FX-305(P)
(Note) Only updated version of FX-301(P) can be used. Do not use the previous version of FX-301(P). The updated version of FX-301(P) have ''NAVI'' printed on one side.
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption600 mW or less (when all indicators light up)
InputHigh: +4 V to +V DC
Sink current 0.5 to 3 mA
Input impedance 10 kOhm approx.
Low: 0 to +0.6 V DC, or open
Power indicatorGreen LED (Lights up when the power is ON)
Transmission operation indicatorGreen LED (Lights up when loaded, and 2-level / Limit teaching, blinks to lights up when saved, and Full-auto teaching)
Ambient temperature-10 to +55 degrees +14 to +131 degrees Fahrenheit (If 4 to 7 sensors are connected in cascade: -10 to +50 degrees +14 to +122 degrees Fahrenheit , if 8 to 16 sensors are connected in cascade: -10 to +45 degrees +14 to +113 degrees Fahrenheit ) (No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
MaterialEnclosure: Heat-resistant ABS
Connection methodConnector
(Note) The cable for unit connection is not supplied as an accessory. Be sure to use the optional quick-connection cables given below.
Main cable (3-core)
CN-73-C1 (cable length 1 m 3.281 ft), CN-73-C2 (cable length 2 m 6.562 ft), CN-73-C5 (cable length 5 m 16.404 ft)
WeightNet weight: 20 g approx.
Gross weight: 40 g approx.
AccessoryCN-EP1 (Connector for input device) (Note) : 1 pc.
(Note) The applicable wire is 0.08 mm2 (AWG 28) to 0.5 mm2 (AWG 20) and the wire sheath diameter should be dia. 1.5 mm dia. 0.059 in or less.

MENU

Recently checked products

Recently checked product numbers