Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

NPS-CT7｜ON / OFF Input Sensor Controller NPS(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    NPS-CT7

    Part Number

    NPS-CT7

    Product

    ON / OFF Input Sensor Controller

    Details

    High-performance

    Product Name

    		 ON / OFF Input Sensor Controller NPS(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberNPS-CT7
    Product NumberNPS-CT7
    Products NameON / OFF Input Sensor Controller
    Product detailsHigh-performance
    Connectable sensorsPhotoelectric sensor, inductive proximity sensor, etc., with NPN transistor output or relay output
    Supply voltage100 to 240 V AC±10%
    Power consumption6 VA or less
    Power supply for sensor : Voltage12 V DC ± 10 % (incorporated with short-circuit protection)
    Power supply for sensor : Current130 mA max.
    OutputRelay contact 1c
    ・Switching capacity : 250 V 3 A AC (resistive load)
    ・Electrical life : 100,000 switching operations or more(rated load)(at 1,800 operations/hour)
    ・Mechanical life : 10 million switching operations or more(at 36,000 operations/hour)

    NPN open-collector transistor
    ・Maximum sink current : 100 mA or less
    ・Applied voltage : 30 V DC or less(between output and 0 V)
    ・Residual voltage : 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
    Output : Output operationSwitchable normal operation or inverse operation
    Response timeRelay contact: 10 ms approx., NPN open-collector transistor: 5 μs or less
    Indicators : PowerRed LED (lights up when the power is ON)
    Indicators : Output Red LED (lights up when the output is ON)
    Indicators : Sensor signal inputRed LED
    (lights up when the sensor signal input is effective)
    Indicators : External synchronization inputRed LED
    (lights up when the external synchronization input is effective)
    External synchronization functionGate trigger and edge trigger
    Timer functionThree function selectable timer
    (Timer period: switchable either 40 ms to 1 sec. or 0.4 sec. to 10 sec.)
    Environmental resistance : Ambient temperature-10 to +50 ℃ +14 to +122 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉
    Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
    Environmental resistance : Voltage withstandability1,500 V AC for one min. between the power and the output terminals
    Environmental resistance : Insulation resistance10 MΩ, or more, with 500 V DC megger between the power and the output terminals
    Environmental resistance : Vibration resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
    Environmental resistance : Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions two times each
    MaterialEnclosure: ABS, Terminal block: PBT (Glass fiber reinforced)
    Connecting methodTerminal block
    Net weightNet weight: 160 g approx.
    AccessoryShort bar: 1 pc., NPS-CV (Protection cover): 1 pc., Short-circuit protection plate: 1 pc., Adjusting screwdriver: 1 pc.

    MENU

    Recently checked products

    Recently checked product numbers